*mydirectindustry

AHP-301CP Cold plate

1 / 2 PagesView full catalog

AHP-301CP Cold plate

Product catalog summary

Features

Direct contact cooling capability up to 52ºC below room temperature.
Lightweight design at 11 lbs. (5.0 kg).
Can be mounted through a bench top or enclosure wall in any orientation.
No need for compressors, fluorocarbons, or filters, ensuring virtually maintenance-free operation.
Constructed with a stainless steel exterior housing.

Includes

Cold plate accessory with tapped holes.
Rubber feet for stability.
Power input cord.
Machined cold plate surface for efficient cooling.

Specifications

Model	Part Number	Function	Voltage (VAC)	Current (Amps)	Weight (lbs/kg)	Temperature Control	Operating Ambient (°C)
AHP-301CP	1-7090-0-000	Cool only	120	1.2	11 (5)	None	-10/+60
AHP-301CP	1-7050-0-000	Cool only	120	1.2	11 (5)	EXT*	-10/+60
AHP-301CPHC	1-7050-1-000	Heat/Cool	120	1.2	11 (5)	EXT*	-10/+60
AHP-301CP	1-7092-0-000	Cool only	240	0.6	11 (5)	None	-10/+60
AHP-301CP	1-7052-0-000	Cool only	240	0.6	11 (5)	EXT*	-10/+60
AHP-301CPHC	1-7052-1-000	Heat/Cool	240	0.6	11 (5)	EXT*	-10/+60

* Unit is set for 5-32 VDC external signal, relay(s) included.

Performance Curve

The performance curve is defined by the equation of the line: y=ΔT(°C) x=Capacity (Watts). The ambient temperature affects the cold plate performance as follows:

At 20°C: y=.68x-44.0
At 40°C: y=.68x-48.0
At 60°C: y=.68x-52.0

Environments

Bench top
Factory
Industrial/OEM

Cooling Capacity

The cooling capacity is 70 Watts at 0 °C ΔT with a 40 °C ambient temperature.

Catalog excerpts

AHP-301CP Cold Plate Air Cooled Bench Top General Purpose 120 VAC, 240 VAC Input 70 Watts FEATURES • Direct contact cooling as much as 52ºC below room temperature • Weighs only 11 lbs. (5.0 kg) • Mounts through bench top or enclosure wall • No compressor, fluorocarbons or filters • Virtually maintenance-free operation • Stainless steel exterior housing • Mounts in any orientation INCLUDES • Cold plate accessory tapped holes • Rubber feet • Power input cord • Machined cold plate surface SPECIFICATIONS MODEL PART NUMBER AHP-301CP 1-7090-0-000 Cool only AHP-301CP 1-7050-0-000 Cool only AHP-301CPHC 1-7050-1-000 Heat/Cool AHP-301CP 1-7092-0-000 Cool only AHP-301CP 1-7052-0-000 Cool only AHP-301CPHC 1-7052-1-000 Heat/Cool * Unit is set for 5-32 VDC external signal, relay(s) included PERFORMANCE RATING BTU/HR CURRENT AMPS. TEMP. CONTROL *

Open the catalog to page 1

Cooling Capacity (BTU/HR) Ambient Temp Cooling Capacity (Watts) Equation of line: y=AT(°C) x=Capacity (Watts) Cold Plate - Air Cooled COOLING CAPACITY Cold Plate Input, Fuse, Switch * Dimension does not include hardware and sealant. Dimensions: Inches [Millimeters] Accessory Holes

Open the catalog to page 2

All TECA (ThermoElectric Cooling America) catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list