SAS BOP Specifications and Variants

The document details various SAS Blow Out Preventers (BOP) designed for drilling operations with different diameters and counter pressures. Models include SAS BOP 016.090, 016.120, 075.100, and 150.100, each suited for specific drilling conditions and table counter pressures.

Key Components and Terminology

• A: Ball joint (rotule)
• B: Mechanical brake (frein mécanique)
• C: Grouting spacer (entretoi)
• D: Isolation valve (vanne d’isolation)
• E: Outlet (exhaure)
• F: Rotating Blow Out Preventer (BOP tournant)

Dimensions and Pressure Ratings

The BOPs cover a pressure range from 16 bar (230 psi) up to 150 bar (2175 psi). Passage diameters vary between 96 mm (3 3/4") and 120 mm (4 3/4") depending on the model.

Examples of maximum pressure and passage diameters:

• SAS BOP 001166...009900: 16 bar max pressure, 96 mm passage diameter
• SAS BOP 001166...112200: 16 bar max pressure, 120 mm passage diameter
• SAS BOP 007755...110000: 75 bar max pressure, 100 mm passage diameter

Weights

Weights for components A to F are provided in both daN and lbs, indicating the mass of each part for different BOP models. For example, component A weighs 113 daN (225 lbs) in the 16 bar models.

Rotating Seals for Rods

Rotating seals are specified for rods with diameters ranging from 36 mm to 102 mm, depending on the BOP model:

• SAS BOP 016.090 and 016.120: seals for rods from 36/40 mm up to 73/83 mm
• SAS BOP 075.100: seals for rods from 55/60 mm up to 102 mm

Other sizes are available upon request.

Additional Notes

The document emphasizes that TEC continuously improves its products and reserves the right to modify designs, materials, and specifications without prior notice. This disclaimer indicates that the provided information is not contractual.

Contact Information

TEC System is located at 14 rue Emile ZOLA, 86530 NAINTRE, France. Contact details include phone: +33 (0)5 49 93 76 00, fax: +33 (0)5 49 93 76 29, website: www.tecsystem.fr, and email: [email protected].