Overview

This document provides technical specifications and operational details for various industrial mixers and slurry equipment models designed for handling mud, slurry, and concrete mixtures. The equipment can be manual or automatic and includes features for safety and operational efficiency.

Equipment Dimensions and Load Capacities

• UFC 1200 L: Length 6000 mm, Width 2400 mm, Height 2400 mm
• UFC 250: Length 2800 mm, Width 1460 mm, Height 2250 mm, Load capacity 1450 daN
• TMD 120, 250, 500, 1200: Various sizes with lengths from 1100 mm to 2350 mm, widths from 1050 mm to 2000 mm, heights from 1650 mm to 2280 mm, and load capacities ranging from 380 daN to 2300 daN

Key Features

• Inclined bottom for efficient discharge
• Cleaning door for maintenance
• Emergency stop for safety
• Forklift reservations and lifting hooks for handling

Technical Specifications of Mixers

UFC Mixer Series Specifications

• UFC 11 22 00: Mixer volume 120 L, mixer power 5.5 kW (7.5 hp), fabrication 2 to 2.5 m³/h, agitator volume 300 or 500 L, agitator power 1.1 or 2.2 kW, rotation speed 30 or 35 rpm
• UFC 22 55 00: Mixer volume 250 L, mixer power 9.2 kW (12 hp), fabrication 4 to 6 m³/h, agitator volume 800 or 1000 L, agitator power 2.2 kW, rotation speed 35 rpm
• UFC 55 00 00: Mixer volume 500 L, mixer power 9.2 kW (12 hp), fabrication 8 to 10 m³/h, agitator volume 1500 or 2000 L, agitator power 4 kW, rotation speed 28 rpm
• UFC5 500 00 T: Mixer and water volume 500 L each, mixer power 9.2 kW (12 hp) IP65, agitator volume 700 L, agitator power 2.2 kW IP65, rotation speed 35 rpm, manual or automatic operation with 3 components and 4 formulations
• UFC 11 22 00 00: Mixer volume 1200 L, water volume 1000 L, mixer power 18.5 kW (25 hp), fabrication 15 to 20 m³/h, agitator volume 3000 L, agitator power 4 kW, rotation speed 28 rpm, automatic operation with 4 components (3 screws, 1 liquid), 4 formulations, and management of mix ends

Operational Modes

The equipment supports both manual and automatic operation modes. Automatic systems can handle multiple components and formulations, including management of leftover mixes.

Safety and Handling

• Emergency stop mechanisms are integrated for safety
• Forklift reservations and lifting hooks facilitate safe and efficient handling

Manufacturer's Notice

TEC reserves the right to modify designs, materials, and specifications without prior notice. The information provided is not contractual and is subject to change.

Contact Information

TEC System
14 rue Emile ZOLA - 86530 - NAINTRE – France
Tel: +33 (0)5 49 93 76 00
Fax: +33 (0)5 49 93 76 29
Website: www.tecsystem.fr
Email: [email protected]