TEADIT 24 SH - ePTFE gasket sheet
2Pages

Description: TEADIT 24SH is a large gasket sheet produced from 100% pure, multi-directionally expanded PTFE Advantages: • Universally employable gasket sheet for all applications. It is suitable for all types of flanges, nearly all media, a wide temperature range and for applications with the toughest demands on purity. It is inherently clean and non-toxic. • Gaskets of multi-directionally expanded PTFE have exceptional mechanical strength which allows operation with minimal creep at elevated temperatures. • The excellent malleability of TEADIT 24SH makes repairing of small damages and/or irregularities of the sealing area (flange surface) unnecessary. • Gaskets cut from TEADIT 24SH are dimensionally stable, i. e. they do not get wider when compressed. This allows narrow flange faces to be sealed safely. • TEADIT 24SH is quick and simple to install. The used gasket can be removed easily and without residue. Approvals: • TA-Luft • Blow-Out-Test VDI 2200 • FDA • USP Plastic Class VI • Germanischer Lloyd • WRc • BAM • AREVA • Colour: white • Size: 1500mm x 1500mm • Thickness: from 0.5 mm up to 6,0 mm • Temperature range: -240° C up to +270° C for short periods up to 315° C • Chemical resistance: chemically inert against all substances (pH 0-14), including the most aggressive acids and lyes. The only exceptions are molten alkali metals and elemental fluorine at high temperature and pressure. • Operating pressure: from vacuum up to 200 bar • Aging: TEADIT 24SH is not subject to aging or weathering. It can be stored indefinitely. • Safety: TEADIT 24SH complies to FDA regulations for food, it is physiologically harmless. • Suitable for oxygen applications. Please note: the colour of the actual product might vary from the above image on this data-sheet. The P x T diagram above indicates the service limits considering the simultaneous influence of pressure and temperature. The green area represents the normal service limits, while the orange coloured area shows the maximum application limits. TEADIT INTERNATIONAL - Rosenheimer Str. 10, 6330 Kufstein, AUSTRIA Tel.: +43-5372-64020-0, Fax: +43-5372-64020-20 austria@teadit.eu - www.teadit.eu Since all properties, specifications and application parameters shown throughout this catalogue are approximate and may be mutually influenced, your specific application should not be undertaken without independent study and evaluation for suitability. All technical data and advice given is based on experiences TEADIT® has made so far. Failure to select proper sealing products can result in damage and/or personal injury. Properties, specifications and application parameters are subject to change without notice. TEADIT® does not undertake any liability of any kind whatsoever.

Technical data property nominal value tensile strength room temperature stress retention room temperature room temperature specific leakage rate L VDI 2440 / TA LUFT TEADIT INTERNATIONAL - Rosenheimer Str. 10, 6330 Kufstein, AUSTRIA Tel.: +43-5372-64020-0, Fax: +43-5372-64020-20 austria@teadit.eu - www.teadit.eu Since all properties, specifications and application parameters shown throughout this catalogue are approximate and may be mutually influenced, your specific application should not be undertaken without independent study and evaluation for suitability. All technical data and advice...