TEADIT 24 BF - PTFE-joint-sealant-tape
1Pages

TEADIT 24 BF Material properties: TEADIT 24 BF is a non-asbestos gasket material made from pure virgin PTFE and dimension-stabilizing filler material. The whole production process is subject to strict quality control, registered under DIN EN ISO 9001. Please note: the colour of the actual product might vary from the above image on this data-sheet. Application areas: TEADIT 24 BF is particularly well suited for narrow sealing surfaces, high assembly pressures, high operating temperatures, thermal cycling. It also compensates well for out-of-parallel and/or damaged sealing surfaces. Typical applications are heat exchangers, large containers, tank lids, pump housings, flanges, hand- and manholes, etc. Technical data: • Temperature range: - 240°C up to 260°C, for short periods up to 310°C • Chemical resistance: resistant against all chemicals from pH 0-13 except molten alkali metals and elemental fluorine at high temperature and pressure. Limited applicability for highly concentrated caustic media at temperatures above 100°C • Pressure resistance: vacuum up to 200 bar 3 3 • Density: 1,0 g/cm , +/- 0,1g/cm • Colour: white Advantages: • quick and simple installation (please pay attention to and/or ask for - the installation instructions for TEADIT 24 BF) • reduced down time • no waste • no cost for gasket-cutting • long gasket life • low stock cost • unlimited shelf life (Please note: adhesive tape has limited shelf life!) Gasket parameters DIN 2505: pre-forming parameters KO x KD • at 6 bar KO x KD = 23 x BD (N/mm) • at 16 bar KO x KD = 28 x BD (N/mm) • at 40 bar KO x KD = 32 x BD (N/mm) • K1 = 2,5 x BD; BD = width under compression Standard dimensions: Dimensions (mm) Standard flange size • 6 x 2,5 up to DN 600 • 8 x 3,5 from DN 600 up to DN 1200 • 10 x 5 DN 1200 and larger • TEADIT 24 BF is available on spools, with or without self-adhesive strip. TEADIT INTERNATIONAL - Rosenheimer Str. 10, 6330 Kufstein, AUSTRIA Tel.: +43-5372-64020-0, Fax: +43-5372-64020-20 austria@teadit.eu - www.teadit.eu Since all properties, specifications and application parameters shown throughout this catalogue are approximate and may be mutually influenced, your specific application should not be undertaken without independent study and evaluation for suitability. All technical data and advice given is based on experiences TEADIT® has made so far. Failure to select proper sealing products can result in damage and/or personal injury. Properties, specifications and application parameters are subject to change without notice. TEADIT® does not undertake any liability of any kind whatsoever.