Packing ring set RS 66 TA-L
1Pages

{{requestButtons}}

Catalog excerpts

Packing ring set RS 66 TA-L - 1

Packing ring set RS 66 TA-L Construction: The Teadit packing ring-set RS 66 TA-L is made up from three different styles of packings. This combination results in an very low leakage rate combined with high operational safety, excellent mechanical strength as well as quick and easy installation. The top and bottom rings are made from our patented EWK yarn, which combines the chemical resistance of PTFE with the mechanical strength of Aramid. These rings have the very low coefficient of friction of PTFE and are therefore not shaft scoring, while the Aramid core of the yarn prevents extrusion and a reduction of the assembly pressure. Aramid yarn in combination with a special lubricant based on Graphite is the material from which the internal rings are constructed. Finally, the middle ring, made from pure PTFE fibre, completes the combination of packing rings that provide optimum performance against leakage. Because of the construction as a combination of open rings, the packing ring-set RS 66 TA-L can be installed quickly and easily without disassembling the valve. Because of the high mechanical strength of the EW-K yarn used, no live-loading is necessary. Please note: the colour of the actual product might vary from the above image on this data-sheet. Molten alkali metals, fluorine compounds at high temperature and high pressure. Technical data: Temperature range: -100 °C up to +280 °C Pressure: up to 150 bar pH range: 0 – 14 Application areas: The Teadit packing ring-set RS 66 TA-L is ideal for all applications which require exceptional chemical resistance, high mechanical strength and extremely low leakage rates. TEADIT INTERNATIONAL - Rosenheimer Str. 10, 6330 Kufstein, AUSTRIA Tel.: +43-5372-64020-0, Fax: +43-5372-64020-20 austria@teadit.eu - www.teadit.eu Since all properties, specifications and application parameters shown throughout this catalogue are approximate and may be mutually influenced, your specific application should not be undertaken without independent study and evaluation for suitability. All technical data and advice given is based on experiences TEADIT® has made so far. Failure to select proper sealing products can result in damage and/or personal injury. Properties, specifications and application parameters are subject to change without notice. TEADIT® does not undertake any liability of any kind whatsoever.

Open the catalog to page 1

All Teadit catalogs and technical brochures

  1. Packing 2202

    1 Pages

  2. Packing 3110

    1 Pages

  3. 28LS-LE

    3 Pages

  4. PTFE

    12 Pages

  5. 30 SH

    3 Pages

  6. 24BB

    2 Pages

  7. 24B

    2 Pages

  8. TF 1510

    2 Pages

  9. 24SH

    2 Pages

  10. TEADIT 24 BB

    1 Pages

  11. Expanded PTFE

    12 Pages