Expanded PTFE
12Pages

RUCTURL PTFE SEALING MATERIALS

35TEADIT PTFE gasket materials of the newest gnration... Numerous advantages make our PTFE-products an ideal and extremely versatile sealing material: - chemical resistance from pH 0 - 14 - temperature range from -240°C up to + 270°C (+310°C for short periods) - high residual stress - physiologically harmless - conforms to FDA regulations - non-ageing, UV resistant - non-inflammable - vacuum resistant ...perfected by special TEADIT® manufacturing processes Ourall-purpose mono-directionally expanded PTFE joint sealant tapes are manufactured from 100% pure PTFE (Polytetrafluorethylen). A...

TtADIT Structured PTFE gasket material TF The TF range of PTFE gasket sheets are made from pure PTFE with spcial fi11er substances. Because of the multidirectionally orientated fibre structure of these PTFE-sheets, the problems usually associated with PTFE, like cold flow and creep, have been largely eliminated. Gaskets from those sheets can be used in considerably higher temperature/pressure combinations than conventional PTFE materials. Advantages - excellent compressibility - outstanding recovery - low hot creep during service - excellent sealability - drastically reduced cold flow and...

TtADIT Structured PTFE gasket material TF 1580 filled with Barium Sulfate colour: off-white Spcial advantages - excellent rsistance against most chemicals - particularly suited for use with caustics Application areas - suitable for 驄clean" processes and products - extremely versatile gasket material, best suited for pharmaceutical and food industry Technical data density (at delivery): S = 2.9 g/cm3 temperature range: -210°C up to + 260°C Tests and approvals: BAM, DVGW, FDA, TA-Luft max. pressure: up to 83 bar pH 0 - 14 minimum assembly pressure QQmin 001 < 10 MPa mim gasket pressure under...

TEADIT® 24 SH TEADIT® 24 SH is a gasket sheet produced from pure, multidirectionally expanded PTFE. A spcial production process ensures equal tensile strength in all directions. This makes gaskets cut from TEADIT® 24 SH one of the best, most versatile and most reliable gasket materials on the market. Cold flow and cree^^ has been eliminated, gasket parameters have been drastically improved, while all the excellent physical properties of PTFE have been fully retained. Advantages - material does not get wider under compression - easy to cut or punch - suitable also for enamel flanges and/or...

TEADIT® 25 BI This top of the range PTFE joint sealant tape belongs also to the group of multi-directionally expanded PTFE sealing materials. Again, a very complex production process ensures equal rigidity in longitudinal and cross direction, resulting in high dimensional stability and extremely low cold flow, combined with excellent malleability and very easy handling. This makes TEADIT® 25 BI particularly well suited for use with all pressure sensitive and stress sensitive connections, it also compensates for irregularities and/or damages on the sealing areas. Advantages Safety...

IADIT Mono-directional ePTFE gasket material TEADIT® 24 B TEADIT® 24 B is a high-grade PTFE joint sealant tape, produced by a spϩcial monoaxial stretching process from 1 00% pure PTFE. An adhesive strip - approved for use with foodstuffs makes installation quick and easy. Advantages Safety - chemically inert against most substances - covers a wide temperature range - non ageing, UV resistant - eliminates the risk of using the wrong gasket material Quick and easy installation - adhesive strip aides installation - excellent malleability compensates for irregularities - used tape can be...

TtADIT Mono-directional ePTFE gasket material TEADIT® 24 BB TEADIT® 24 BB is the wider version of our universally Advantages applicable, 1 00% pure, expanded PTFE gasket tape. Although the fibres have a multi-directional orientation, tensile strength is considerably higher along the longitudinal axis. TEADIT® 24 BB is suitable to cut or punch gaskets from and has a full width adhesive tape on one side, approved for use with foodstuffs (also available without adhesive tape). Technical data density (at delivery): S = 0.75 g/cm3 temperature range: -240°C up to + 270°C pressure: from vacuum up...

TEADIT® 24 BF is a PTFE joint sealant tape made from pure PTFE with a dimension-stabilizing filler material. It has been developed for demanding sealing applications. Advantages - better dimensional stability than conventional PTFE joint sealant - higher residual stress values Application areas - high gasket pressure - large flanges and vessels - thermal cycling Technical data density (at delivery): S = 1.0 g/cm3 temperature range: -240°C up to + 270°C pressure: from vacuum up to 200 bar pH 0 - 13 gasket parameter, assembly o"VU/001 = 32 MPa gasket parameter, operational m0,0i 2.5 Product...

A global player in sealing technology TEADIT® has modern production facilities in Europe and the Americas - all producing according to the highest quality standards registered and certified under ISO 9001. TEADIT® is an active member of international bodies like ESA, FSA, PVRC and CEN, and as such is involved in coordinated developments of the fluid sealing industry. As technologically competent partners of our customers we make our experience and knowledge available to them. We offer a very wide range of sealing products - from conventional compressed fibre sheets to our multidirectionally...

PTFE gasket material structured, filled PTFE sheets multidirectionally exp. PTFE sheets multidirectionally exp. PTFE tapes monodirectionally exp. PTFE tapes Braided gland packings Carbon / Graphite packings PTFE packings PTFE / Aramid packings Aramid packings Glass packings Acrylic packings Ramie packings Polyimid packings Novoloid packings Nomex packings Preformed packing rings TA-Luft packing sets Compressed fibre sheets Carbon / Graphite /NBR Aramid /NBR Cellulose / NBR Graphite sheets Graphite sheets with plain metal insert Graphite sheets with tanged metal insert Pure graphite sheets...