ELECTRON® FSS
1Pages

{{requestButtons}}

Catalog excerpts

ELECTRON® FSS - 1

ELECTRON® FSS Fire Safe and Electrical Insulating Gasket Description: The Electron® FSS isolation and fire safe gasket is composed by a double rail serrated 316 SS core, faced on both sides with Tealon™ and TerMica laminate materials. Electron® FSS includes glass reinforced epoxy (G-10) insulation sleeves (1 per stud), TerMica insulation washers (1 per stud) and galvanized carbon steel washers (2 per stud). Its robust design aims to meet the sealability, electrical insulation and fire resistance requirements for industrial pipelines. Application: The Electron® FSS Gasket is designed to meet critical applications even under the most severe pressure and chemical resistance requirements. It is suitable for piping requiring electrical insulation in lines with sea or waste water, chemicals, hydrocarbons and applications requiring fire resistance. Sleeve/Washer Assembly: Properties: Technical Data Flanges Type/Class RF and RTJ ASME 150-2500# and API 6A 2-10K Electrical Resistance > 100 MΩ (1500 Vdc) Dielectric Strength 5 kV (60 Hz Vac per 1 minute) Water absorption Maximum Seating Stress Maximum Temperature Recommended installation configuration based on laboratory tests: Insulation Components Sleeve TerMica Insulation Gasket Insulation Washer Gasket Factors “m”and “y” Sealability Data Standard Leak rate Properties and application parameters shown throughout this data sheet are typical. Your specific application should not be undertaken without independent study and evaluation for suitability. For specific application recommendations consult TEADIT. Failure to select proper sealing products could result in property damage and/or serious personal injury. Specifications are subject to change without notice; this edition cancels all previous issues. Teadit Indústria e Comércio Ltda. Av. Henry Bobst, 401 - Bairro da Ponte - Itatiba - SP - CEP: 13251-716

Open the catalog to page 1

All Teadit catalogs and technical brochures

  1. Packing 2202

    1 Pages

  2. Packing 3110

    1 Pages

  3. 28LS-LE

    3 Pages

  4. PTFE

    12 Pages

  5. 30 SH

    3 Pages

  6. 24BB

    2 Pages

  7. 24B

    2 Pages

  8. TF 1510

    2 Pages

  9. 24SH

    2 Pages

  10. TEADIT 24 BB

    1 Pages

  11. Expanded PTFE

    12 Pages