FullAXS CONNECTOR SEALING AND CABLE ASSEMBLY
11Pages

FullAXS CONNECTOR SEALING AND CABLE ASSEMBLY System Solution Guide

NEXT GENERATION X-TTA SOLUTION Next generation WiMAX and Long Term Evolution (LTE) Fiber/Power/Signal To The Antenna (x-TTA) connectivity designs require rugged cable assemblies for outdoor use. For direct connection, these cable assemblies need to plug directly into the optical transceivers or other connector types though a bulkhead construction. For this specific application, the connector design will need to accommodate for a large tolerance in Z-direction. Furthermore, the connector shell must allow for easy one handed mating. TE Connectivity’s (TE) FullAXS connector sealing systems...

FullAXS Mini connector sealing system delivers the small size and scalability to design in power and signal connectivity almost anywhere on the box. Easy-to-install mating features and ruggedized protection allow them to be installed in virtually any environment. EFFICIENCY IN DESIGN FullAXS Mini connector sealing system is about 20% smaller than FullAXS products and can be placed almost anywhere on the box thanks to their flexible design. As space in the bottom of the box gets smaller and smaller, FullAXS Mini connector sealing products make it easy to transmit power or signal using...

KEY PRODUCT FEATURES EFFICIENCY IN DESIGN • About 20% smaller than FullAXS products • Flexible sealing system allows connectors to be placed anywhere on the box • Modular design makes connectors scalable in form, fit and function MATING MADE EASY • Twist angle to lock the robust bayonet is only 30o • Enables one-handed, blind installs from any angle using only thumb and index finger to easily grip the tapered back end of the connector • 3-sense locking feedback: visual, audio and tangible • Floating connector solution secures correct mating in Z-direction LONG LASTING IN HARSH ENVIRONMENTS...

FullAXS MINI CABLE ASSEMBLIES Products Fiber optic floating cable assembly FEATURES • Open bulkhead for easy access to SFP • Bulkhead cutout allows for removal of transceiver through the bulkhead (no need to open Remote Radio Head (RRH) for transceiver replacement) • Water proof, dust proof and corrosion resistant • Plug has tolerance free design, free floating on Z-axis • No cable buckling during or after installation SPECIFICATIONS Mechanical/Electrical Optical Duplex LC Interconnect • 100N pull force at cable (IEC 60512-17-1 / EIA-364-38) • 50 N side load in all directions at cable (IEC...

FullAXS MINI CABLE ASSEMBLIES Products FIELD INSTALLABLE FEATURES • Fiber DPX “fool proof” design protects the fiber cable during uninstallation by preventing the outer shell being turned before the nut is unscrewed (see diagrams below) • Long version includes clamp to tube • Plug diameter 29.8mm “Fool Proof” Feature INSTALLATION OF FULLPROOF Latch on bayonet shell goes into the groove in the threads Nut locks the latch in the groove, preventing the bayonet shell from being disconnected first Hand Tightened Foolproof DATA AND DEVICES / FullAXS CONNECTOR SEALING AND CABLE ASSEMB

FullAXS MINI CONNECTOR SEALING Products Bulkhead; die cast bayonet Standard Cost effective metal diecast 2 bulkhead versions available: standard and EMI shielded Transceiver fully protected in the bulkhead Cut-out for easy access to SFP module Bayonet style of locking Ingress protection according to IP65 and IP67 sealing Keying Same bulkhead for fiber, RJ45, PoE, power and signal applications Shielded and unshielded dust caps available Rectangular or square footprint Part Numbers FullAXS MINI FIBER ASSEMBLIES Part Number FOSM GLARO LEAD 4.8 mm FXS Mini FullAXS MINI FIELD INSTALLABLE KITS...

FullAXS CONNECTOR SEALING APPLICATIONS • Open bulkhead for easy access to SFP • Positive mechanical feedback to operator when fully mated • One-hand mating • Duplex LC interface • Bulkhead cutout allows for removal of transceiver through the bulkhead (no need to open RRH for transceiver replacement) • Robust bayonet locking for easy, fast, and secure mating • Multimode and single mode • Water proof, dust proof and corrosion resistant • Expansion to RJ45 and Power possible • Plug has tolerance free design, fully free floating on Z-axis • No cable buckling during or after installation • Cost...

MULTI-FIBER CABLE ASSEMBLIES TE’s new multi-fiber cable assemblies can provide high signal data connectivity routing commonly through only one cable connecting multiple units in the field instead of one assembly for each. This can allow for space savings within densely populated applications. LC DUPLEX-LC DUPLEX PORTFOLIO OVERVIEW • Allows for aggregation of multiple optical channels each routed through separate CIPRI cable assemblies into a single multi-fiber cable assembly • Faster and easier installation at site resulting in considerable savings in installer workforce cost • Reduced...

FULLAXS LC-LC DUPLEX PORTFOLIO OVERVIEW • External sealing provided by FullAXS sealing system with millions deployed throughout field over the past decade • Easy fool-proof installation - Positive feedback to operator when fully mated • Allows for aggregation of multiple optical channels each routed through separate CIPRI cable assemblies into a single multi fiber cable assembly • Faster and easier installation at site resulting in considerable savings in installer workforce cost • Reduced installation material costs • Junctions, fanouts and cables tested for various weather conditions...

TE TECHNICAL SUPPORT CENTER FullAXS, TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE...