TOOLEX VISE WORKHOLDING SYSTEMS

ReLock® Modular Workholding System The ReLock Vise System combines high manufactured tolerances with unequalled versatility in providing two-station and eight-station production vises. ReLock CNC vises, available with machinable soft jaws, hard jaws, master jaws and parallels, or fixture plates, allow the machinist a variety of configurations with the same vise. Bodies are manufactured from 80,000 PSI ductile cast iron, and ways are flame hardened and ground to accuracies of +/- .0005. Manual and hydraulic two-station and eight-station vises are available in widths of 4”, 6” and 8. • Reduce setup...

Features and Benefits table Space Optimized Table space Auto Offset Mechanism ReLock’s compact modular Compact modular design design multitude of allows aallows a multitude of mounting configuramounting configurations. tions. Vises can be mountVises can be mounted close ed close together without together without hindering hindering removal or removal or attachment of attachment of 8-station jaws. The ReLockjaws. (shown) is ideal for horizontal machining centers, as well as with rotary indexers on vertical machining centers. The unibody design makes it lightweight, compact and extremely rigid....

ReLock Vise System Accessories Optimized table space Snaplock Machinable Fixture Jaws AccuSnap Vise Jaw System ReLock’s compact modular Jaws can be attached, design allows a multitude reversed, removed or of mounting configuraindexed in a matter tions. Vises can be of seconds. The jaws mounted extremely versaare close together without hindering removal tile, allowing endless or attachment possicustomizationof jaws. bilities. Jaws are manufactured from steel and high quality aluminum material. See pages 173-175. The AccuSnap Vise Jaw system (pictured) shows master jaws and parallels being used...

ReLock Vise System Overview ACCUSNAP/QUICKCHANGE PARALLELS AccuSnap and QuickChange Parallels are designed for a multitude of setup variations when you need to position a workpiece between hardened jaws. AccuSnap parallels snap in and out of the AccuSnap Master Jaws in seconds. QuickChange parallels slide into position via a dovetail slot & gib. ACCUSNAP/QUICKCHANGE MACHINABLE FIXTURE JAWS AccuSnap and QuickChange Machinable Fixture Jaws can be customized quickly to fixture a wide array of workpieces. The jaws snap or slide in and out of the master jaws in seconds. Available in either aluminum...

ReLock Double Station Vise Starter packages available on page 172. 6” vise mounting holes shown (4” vise mounting differs) Call for information Vise Size Clamping Pressure Vise Size Part Number Replacement parts available on pages 196-197. Bodies manufactured from 80,000 PSI ductile cast iron • Ways flame hardened to 40 R/C maximum ReLock Double Station Vise with Machinable Soft Jaws ReLock Double Station Vise with Hard Jaws • Vise specifications and jaw capacities shown on above and on page 167. • Includes handle and tool kit (pry wrench and hex wrenches). • See page 173-175 for SnapLock machinable...

Single Station Conversion Plate for ReLock 2-Station Vise • The single station conversion plate, used in conjunction with SnapLock carrier jaw, allows the system to be converted from a double to a single station. • Capacities and configuration examples are illustrated at left. • Single station conversion plate is not compatible with DS6000 vise Vise Size Converts a double station vise to a single station! ReLock 2 and 8-Station Capacities The compact design of the Toolex vise allows you to mount the vises very closely to each other without interference. The SnapLock line of jaws allows you to...

TOOLEX® DS Series – 6” Double Station Hard Jaw Vise • Includes manual off-set mechanism with maximum .250” offset setting • Standard Hard Jaw Set made of 1018 steel • Carrier jaws will accept both AccuSnap and QuickChange master jaws Includes: 6” Vise, 2-piece cast iron Carrier Jaw Set and 3-piece Standard Hard Jaw Set Vise Size Clamping Pressure Vise Size Part Number Bodies manufactured from 80,000 PSI ductile cast iron • Ways flame hardened to 40 R/C maximum 937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: [email protected]

ReLock 8-Station Vise • Vise capacities shown on page 167. • Baseplates are designed to adapt to many machine table sizes. See page 193-195 for specs. • Vise columns can be located on a pallet using edge locating with shims or spacers (not included). Starter packages available on page 172. Specifications Vise Size Vise Size Clamping Pressure Part Number Replacement parts available on pages 198-199 Bodies manufactured from 80,000 PSI ductile cast iron • Ways flame hardened to 40 R/C maximum ReLock 8-Station Vise with Machinable Soft Jaws • Includes handle and tool kit (pry wrench and hex wrenches)....

RELOCK-8 STATION WORKHOLDING SYSTEM The ReLock 8-Station’s compact and lightweight unibody design is perfect for horizontal machining centers. The unibody is manufactured from 80,000 PSI Ductile Cast Iron and the ways are flamed hardened and precision ground to accuracies of +.0005”. It’s also ideal for use with rotary indexers in vertical machining center applications. For special requirements, please use the ReLock-8 Indexer Assembly Quotation Worksheet on page 203. ReLock-8 Support Bracket Part Number RSB4000 Optional adapter plate simplifies attachment of the ReLock-8 to either a pallet or...

ReLock 8-Station Compact Quad DRILLED THRU. AND C’BORED FOR “D” S.H.C.S. (4) PLACES • Designed for machining center with small work envelopes like the Tsugami FMA3. • Through column mounting holes are included to mount directly to the pallet of an HMC without the need for a baseplate. • Clamping pressure = 0 to 6,000 lbs. • Recommended foot lbs. = 45-50 • Mounting kit included. Part Number A B C Package Contents Call for print with mounting information VISE CAPACITIES MACHINABLE JAWS CARRIER & HARD JAWS ReLock-8 Adapter Plate is available on page 170. Bodies manufactured from 80,000 PSI ductile...