Hoist Rings
22Pages

HOIST RINGS Safety Engineered Hoist Rings RATED LOAD from 400 lbs. to 125 tons 937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: info@te-co.com

HOIST RINGS Safety Engineered Hoist Rings • Material: AISI 4140 Aircraft Quality • Finish: Black oxide per mil spec. (cadmium plated available) • Safety Factor: 5:1 • Certified heat treatment • 100% magnetic particle inspected • 200% proof-load tested, with serial number for traceability Torque (Ft/lbs) Metric Rated Load Thread (Kgs) Size A C D E Standard U-Bar Part No. B F Long U-Bar Part No. B F G H – – AK47124 AK47130 AK47136 AK47142 AK47148 AK46950 – – – – – – – – 937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: info@te-co.com

HOIST RINGS Stainless Steel Safety Engineered Hoist Rings Designed for safe lifting! Safety engineered hoist rings rotate and pivot to absorb any pitch, roll or sway of unbalanced loads. • Will not yield to heavy side loads. Helps prevent lifting hook from disengaging. • Helps protect people and material against accidents. • For use in outdoor weather and certain chemical and corrosive environments. • Material: 300 series stainless steel • Safety factor: 5:1 • Liquid penetrant mil 6868 Inch Rated Load Thread (lbs.) Size A C D E Torque (Ft/lbs) Standard U-Bar Part No. B F Long U-Bar Part No....

HOIST RINGS Safety Engineered Hoist Ring Kits This kit enables you to custom assemble the precise swivel hoist ring required for the job. Kits are available in standard and metric sizes, and come complete with U-Bar (body and sub-assembly), screws, bushings, washers and E-rings – enough to configure over 24 different hoist ring sizes and capacities! A handy accessory kit for lifting and moving heavy loads, and a must for your tool crib. (Kit includes 4 of each item) Sub Assembly Rated Load (Lbs) Screw Screw Size Thread Length (Kit includes 4 of each item) Sub Assembly Rated Load (Lbs) Screw...

HOIST RINGS Bushing, Washer, Screw Kits • Aircraft quality “chrome moly” AISI 4140 • Certified heat treatment • 100% magnetic particle inspected • Thread sizes available from 1/4” to 2-1/2” • Change your load rating from 2,500 lbs. to 5,000 lbs. by changing the bushing, washer, and screw. Corresponding Bushing, Hoist Washer Ring Screw Set Thread Size Washer Bushing Screw 937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: info@te-co.com

HOIST RINGS Tuff Forged™ Swivel Hoist Rings Swivels 360 degrees – pivots 180 degrees • Material: Alloy Certified Aircraft Quality • Finish: Phosphate per DOD-P-16232F (cadmium plated available) • Certified heat treatment • 100% magnetic particle inspected • Rated loads from 600-24,000 lbs. • 200% proof-load tested, with serial number for traceability • Safety Factor: 5:1 Torque (Ft/lbs) 937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: info@te-co.com

HOIST RINGS Tuff Forged™ Side Pull Hoist Ring Swivels 360 degrees • Material: Alloy “chrome moly” • Finish: Phosphate per DOD-P-16232F • Safety Factor: 5:1 (*side pull direction only) • 100% magnetic particle inspected • Certified heat treatment • Rated loads from 1,000 lbs. to 5,000 lbs. Rated Load Thread (lbs.) Size A B C D E F G H J R Rated Load Thread (lbs.) Size A B C D E F G H J R Forged Hoist Rings • Pivots a full 180 degrees, but do not rotate • Fixed mounting plate holds ring secure • Material: Aircraft Quality Alloy “chrome moly” • Finish: Black oxide per mil spec. • Certified...

HOIST RINGS Side Load Hoist Rings Swivels 360 degrees – pivots 180 degrees • Designed for side-mounted applications • Extra large rings accept many styles and sizes of hoist hooks • Material: Aircraft Quality Alloy with black oxide finish per mil spec. (cadmium plated available) • Certified heat treatment • 100% magnetic particle inspected Inch Rated • Thread size from Part Load Thread 5/16” to 2” No. (lbs.) Size A B C D E F G • Rated loads from A K43510 650 5/16-18 2 1-1/2 1-7/16 3/8 5/8 1-15/16 3/8 650 to 29,000 lbs. A K43515 800 3/8-16 2 1-1/2 1-7/16 3/8 3/4 1-15/16 3/8 A K43520 1,800...

HOIST RINGS Pivot Lifting Plates Pivots 180 degrees • Material: Aircraft Quality Alloy • Finish: Black oxide per mil spec. (cadmium plated available) • Safety Factor: 5:1 • Certified heat treatment • 100% magnetic particle inspected • Large bail pivots 180° • Ideal for certain OEM applications • Rugged tapered plate minimizes shear force on high strength alloy screw • Base plate can be welded into position, thus eliminating the use of screws • Use high tensile alloy screw equivalent to Grade 8 To obtain maximum load capacity, high strength alloy screws must be used. Thread Torque Size...

HOIST RINGS Round Base Swivel & Pivot Hoist Rings Swivels 360 degrees – Pivots 180 degrees • Material: Aircraft Quality Alloy • Finish: Black oxide per mil spec. (cadmium plated available) • Safety Factor: 5:1 • Certified heat treatment • 100% magnetic particle inspected • Direct mounting • Wide round base helps distribute shear loads • Rated load capacities from 2,500 lbs. to 20,000 lbs. • Many OEM applications • Perfect for pre-cast concrete products: simply cast a threaded anchor or stud into the concrete part. Mount the hoist ring and you have an easy, safe lifting/handling application....

HOIST RINGS Street Plate Lifting Ring Swivels 360 degrees – Pivots 180 degrees PATENT PENDING • Steel trench plates are used to cover trenches in streets and roadways in order to facilitate traffic flow during construction or repair. • Street Plate Lifting Ring lugs are used for tightening and loosening with hammer or steel bar. • The Street Plate Lifting Ring is used by utility companies, contractors and trench plate rental companies. • Material: 4140 Certified Aircraft Quality • Finish: Black oxide per mil spec. (cadmium plated available) • Safety Factor: 5:1 • Certified heat treatment •...