Gaging_Inspection
22Pages

{{requestButtons}}

Catalog excerpts

Gaging_Inspection - 1

M8 metric system available

Open the catalog to page 1
Gaging_Inspection - 2

GAGING & INSPECTION CMM Fixturing System Overview Our line of CMM fixturing is designed for easy assembly and high repeatability, without the added cost and inconvenience of having to build dedicated fixtures. This system offers a highly accurate and flexible solution for holding parts while probing. A variety of component kits and individual components are available to provide the ability to quickly setup a fixture in a matter of minutes. The system works by mounting an aluminum fixture plate with tapped holes to the surface plate of your coordinate measuring machine. Build your CMM...

Open the catalog to page 2
Gaging_Inspection - 3

Aluminum Fixture Plates The purpose of the fixture plate is to provide a staging area to build part fixtures. Basic 3-2-1 fixturing holds true for most CMM fixturing applications, although the clamping force required to fixture parts when inspecting with a CMM is significantly less than what is required for machining. Most CMM fixtures require only light pressure clamping to secure the part in a fixed position. Our soft touch clamps are perfect for clamping in CMM fixturing applications. • Alpha numeric grid pattern • Black hard coat anodized • Custom sizes quoted upon request Mounting...

Open the catalog to page 3
Gaging_Inspection - 4

GAGING & INSPECTION Fixturing Towers The purpose of the fixture towers are to provide a vertical part fixturing solution for CMM fixturing applications. More specifically, CMM fixture towers are especially beneficial when you have longer parts that need to be oriented in an upright position between 2 or more towers. Fixture towers are also applicable when you have a relatively flat part and you need to inspect each of its sides. In this application, CMM fixturing towers make it possible to fixture the part(s) vertically in 1 fixture setup reducing fixturing time and the number of programs...

Open the catalog to page 4
Gaging_Inspection - 5

GAGING & INSPECTION CMM Fixturing Kits Component kits can be purchased with or without purchasing a plate, and all CMM fixture components contained in the kits are also available individually. The Basic Kit, Comprehensive Kit, and Magnetic Component Pack all come with a wooden holder for convenient storage. You can also build your own CMM Fixturing Kit. Call us for a quote at 800-543-4071 ,or visit our website at www.te-co.com Basic Fixturing Kit • Designed for clamping non-magnetic parts • Use with plastic, aluminum and steel Ideal to combine with the Magnetic Component Pack shown on page...

Open the catalog to page 5
Gaging_Inspection - 6

GAGING & INSPECTION Comprehensive Fixturing Kit • Developed to allow added flexibility • Use with plastic, aluminum and steel • Variety of components Provide a quick, 14060 Small Soft Touch Clamp 14064 Large Soft Touch Clamp 14034 Large Adjustable Positioner 14201 Delrin Height Adjuster 14215 1⁄2” Dia. Screw Jack 14075 Delrin Cones 14082 Swivel Joint Rest 14158 Small Toggle Clamp with Pad 14040 1/2” Dia. x 1/2” Height Pin Rest 14041 3/4” Dia. x 1/2” Height Pin Rest 14017 1/2” Dia. x 3/4” Height Standoff 14018 1/2” Dia. x 1” Height Standoff 14019 1/2” Dia. x 2” Height Standoff 14022 3/4”...

Open the catalog to page 6
Gaging_Inspection - 7

GAGING & INSPECTION Magnetic Component Pack • Magnets optimize access for probing of steel parts • Use with steel & iron 14102 1/2” Dia. x 1” Height Magnetic Rest Pad 14103 3/4” Dia. x 1” Height Magnetic Rest Pad 14132 1/2” Dia. x 1” Height Magnetic Pin Rest 14133 3/4” Dia. x 1” Height Magnetic Pin Rest 14141 1/2” Dia. x 1” Magnetic V Standoff 14143 1” Dia. x 1” Height Magnetic V Standoff 40092 Wooden Component Holder 63102 12.7mm Dia. x 25mm Height Magnetic Rest Pad 63103 19mm Dia. x 25mm Height Magnetic Rest Pad 63132 12.7mm Dia. x 25mm Height Magnetic Pin Rest 63133 19mm Dia. x 25mm...

Open the catalog to page 7
Gaging_Inspection - 8

GAGING & INSPECTION Small Toggle Clamp with Pad • Holds parts for probing • Base adjusts for placement Pad – Inch Knurled knob stud included with all pads Toggle Clamp (included with pads 14158 & 63158) Part No. A B C D N/A Large Toggle Clamp with Pad • Holds parts for probing • Base adjusts for placement Knurled knob stud included with all pads Toggle Clamp (included with pads 14159 & 63159) Part No. A B C D N/A 937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: info@te-co.com

Open the catalog to page 8
Gaging_Inspection - 9

GAGING & INSPECTION T-Handle Spring Stop with Pad • Provides horizontal clamping • T-Handle allows for quick changeover • Base adjusts for placement Knurled knob stud included with all pads Spring Stop (included with pads) Adjustable Positioner • Allows for flexible hole placement • Includes knurled knob stud to lock in place 937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: info@te-co.com

Open the catalog to page 9
Gaging_Inspection - 10

GAGING & INSPECTION Standoffs 3 diameters are available in a variety of heights • Provides resting point to elevate part for probing • Low carbon steel Pin Rest • Provides point of rest and side stop for locating • Low carbon steel 937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: info@te-co.com

Open the catalog to page 10
Gaging_Inspection - 11

GAGING & INSPECTION Thread Adapter • Converts between 1/4-20 and 5/16-18 systems • Low carbon steel Part No. A B C 13085 13086 Delrin® Cone • For nesting cylindrical or curved parts • Delrin offers non-marring attribute • Also provides resting point without limiting access to part Delrin® Holder for Magnetic Vee Standoffs For aligning multiple vees to hold cylindrical parts Use with Magnetic Vee shown on page 92. Internal Depth Height .625” .500” Internal Depth Height 937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: info@te-co.com

Open the catalog to page 11
Gaging_Inspection - 12

GAGING & INSPECTION Magnetic Rest Pad • For fixturing steel or iron parts • Magnetic force holds parts during probing • For fixturing cylindrical steel or iron parts • Magnetic force holds parts during probing Locates and holds steel or iron parts during probing. • For holding large cylindrical steel or iron parts • Includes two cap screws to fasten to plate 937-836-0961 • 800-543-4071 • Fax: 937-832-1274 • www.te-co.com • E-Mail: info@te-co.com

Open the catalog to page 12

All TE-CO catalogs and technical brochures

  1. Plain Clamps

    1 Pages

  2. Hoist Rings

    22 Pages

  3. Toggle Clamps

    12 Pages

  4. Toolex Vises

    44 Pages

  5. 5-Axis Vise

    2 Pages

  6. Columns_Plates

    12 Pages

  7. Hoist ring

    22 Pages

  8. Toggle Clamp

    12 Pages