Programmable Power Supplies
71Pages

Programmable Power Supplies

Programmable Power Supplies EVA Series 3 Genesys GENH Series 7 •ATE Systems • Battery simulation • Component burn-in • Plating and etching Output voltage up to 1500V, output current up to 1000A, power range from 200W to 15000W Constant voltage or constant current operation with automatic crossover Last setting memory stores latest settings when power supply is switched off Analogue programming and monitoring for output voltage and current with 0-5V or 0-10V scale Integrated RS232/RS485 (and USBforZ+) communication interface as standard IEEE, LAN and isolated analogue optional...

Features • 2U high Convenient package for system integration • Variable speed fans Minimises audible noise • Constant current & voltage control Flexible control options • Built-in RS-232 / RS-485 & analogue Suitable for Li-ion and other intelligent battery programming interfaces charging systems

1 Minimum voltage is guaranteed to maximum 10% of the rated output voltage. 2 Minimum current is guaranteed to maximum 1% of the rated output current. 3 For cases where conformance to various safety standards (UL, IEC etc.) is required, to be described as 190 - 240VAC (50/60Hz). 4 At 200VAC input with rated output power. 5 Not including EMI filter inrush current, less than 0.2ms. 6 At 170 -265VAC, constant load. 7 From No -load to Full - load, constant input voltage. Measured at the sensing point in Remote Sense. 8 For 150V, 300V models: measured with JEITA RC-9131A (1:1) probe. For...

Model Selector Voltage Current Max Ripple Noise Ripple Efficiency Model Adjust Adjust Power 5Hz 1MHz 200MHz BW 5Hz 1MHz (typical at full load) Range (V) Range (A) (W) (mV) (mV) (mV) % Accessories Part Number Serial Link Cable (included) GEN/RJ45 EVA Series Outline Drawing

GENH Series Programmable DC Power Supplies 750W in 1U Half-Rack Size Built in RS-232 & RS-485 Interface Advanced Parallel Operation Optional Interface: Compliant LAN IEEE488.2 SCPI (GPIB) Multi-drop Isolated Analog Programming Genesys™ Family GenH 750W Half Rack Gen1U 750/1500W Full Rack Gen2U 3.3/5kW

Genesys™ GENH750W-1U The Genesys™ family of programmable power supplies sets a new standard for flexible, reliable, AC/DC power systems in OEM, Industrial and Laboratory applications. Features include: • High Power Density available: 750W in 1U half-rack size. • Wide Range Input (85 - 265Vac Continuous) • Active Power Factor Correction (0.99 typical) • Output Voltage up to 600V, Current up to 100A • Built-in RS-232/RS-485 Interface • Front Panel Lockout • Last-Setting Memory • High Resolution 16 bit ADCs & DACs • Reliable Encoders for Voltage and Current Adjustment • Constant...

Applications Genesys™ power supplies are designed for demanding applications. Common controls are shared across all platforms Last-Setting memory simplifies test design and requires no battery backup. Built-in RS-232/RS-485 gives maximum system flexibility along with 0-5V and 0-10V, selectable analog programming. Wide range of available inputs allows testing of many different devices. Semiconductor Processing and Burn-in Safe-Start may be ENABLED to re-start at Output OFF to protect load. Wide range input (85-265Vac) with Active Power Factor correction rides through input transients easily....

1. Remote Voltage Programming (16 bit) *1: Minimum voltage is guaranteed to maximum 0.2% of Vo Rated. *2: Minimum current is guaranteed to maximum 0.4% of Io Rated. *3: At maximum output power. *4: 85~132Vac or 170~265Vac, constant load. *5: From No-load to Full-load, constant input voltage. *6: For load voltage change, equal to the unit voltage rating, constant input voltage. *7: For 6V models the ripple is measured at 2~6V output voltage and full output current. For other models, the ripple is measured at 10~100% output voltage and full output current. *8: Time for the output voltage to...

General Specifications Genesys™ GENH750W 2.1 INPUT CHARACTERISTICS Also available, Genesys™ 1U full Rack 750W/1500W/2400W 2U full Rack3300W/5000W 11

TDKLambdaGenesys™ Power Benchtop Parallel and Series Configurations Parallel operation - Master/Slave: Active current sharing allows up to four identical units to be connected in an auto-parallel configuration for four times the output power. In Advanced Parallel Master/Slave Mode, total current is programmed and reported by the Master, Up to four supplies act as one. Series operation Up to two units may be connected in series to increase the output voltage or to provide bipolar output. (Max 600V to Chassis Ground). Remote Programming via RS-232 & RS-485 Interface Standard Serial Interface...

Accessories Rack Mounting applications P/NiGENH/RM The Rack Mounted kit allows the units to be zero stacking for maximum system flexibility and power density without increasing the 1U height of the units To install one GENH750W unit or two units side-by-side in a standard 19" rack in 1U(1.75") height, use option kit P/N:GENH/RM Single unit installation Single GENH750W power supply in a standard 19" rack in 1 U(1.75") height, Dual unit installation Two GENH750W power supplies side-by-side in a standard 19" rack in 1U (1.75") height, Benchtop applications P/NiGENH/MO The benchtop stacking...

Outline Drawings Genesys™ GENH 750W 214.0+0.5 NOTE 1 GENH Models 80V to 600V. Connector 80V to 600V model Header Phoenix P/N: GIC 2.5/4-G-7.62 2. Mating plug Phoenix P/N: GIC 2.5/4-ST-7.62. 3. Mating plug Phoenix P/N: MC 1.5/5-ST-3.81. 4. Benchtop assembly x 2 (removable) Screws: 4 x M3x8 marked "A" Supplies with the power supply.

Power Supply Identification / Accessories How to order AC Cable option Region E - Europe GB - United Kingdom J- Japan I - Middle East U - North America Series Output Name Voltage Factory Options Option: IEEE