EPCOS Product Brief 2016 Film Capacitors PCC Power Capacitors for HybridPACK™ IGBT Modules

Film assembly Fig. 1 : Cross section of a metalized film capacitor Fig. 2: Self-healing property of a metalized film capacitor Metallized film capacitors (fig.1) have the advantage that for certain failures in the dielectric the capacitor will not go into short thanks to the ultrathin metallized electrode (thickness typical 10 to 100 nm) and the use of aluminium as material for the electrodes. If a breakdown occurs, the aluminium will evaporate around the breakdown spot and immediately oxidize to Al2 O3, which is an excellent insulator. So the breakdown spot becomes high-impedance and is insulated...

PCC for Infineon HybridPackTM 1 (HP1) PRELIMINARY Fig. 1a - For HP1 platform Additional fixing may be necessary upon application requirements Fig. 2a - For HP1-DC6 platform With side mounting external DC bus bars Fig. 1b - For HP1 platform With side mounting terminals Fig. 2b - For HP1-DC6 platform With side mounting terminals without external DC bus bars HP1 platform 650 V – FS***xR07A1** Ordering code HP1-DC6 platform 705 V – FS***R07A3** Ordering code Considering maximum hot spot temperature at +105 °C and cooling efficiency to be validated. Preferred types. Reduced life time, please refer...

Additional fixing may be necessary upon application requirements (see page 5 with side mounting terminals) 1) Considering maximum hot spot temperature at +105 °C and cooling efficiency to be validated. 2) Preferred types. 3) Reduced life time, please refer to data sheet. Green marked lines: New types ...K/J1xx available during 2016. Red marked line: Not recommended for new designs.

1) Considering maximum hot spot temperature at +105 °C and cooling efficiency to be validated. 2) Preferred types. 3) Reduced life time, please refer to data sheet. Green marked lines: New types ...K/J1xx available during 2016.

Fig. 5 - For HP Drive platform With side mounting terminals 1) Considering maximum hot spot temperature at +105 °C and cooling efficiency to be validated. 2) Preferred types. Green marked lines: New types ...K/J1xx available during 2016.

1) To be confirmed; depending on the application Display of ordering codes for EPCOS products The ordering code for one and the same product can be represented differently in data sheets, data books, other publications and the website of EPCOS, or in order-related documents such as shipping notes, order confirmations and product labels. The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products. Detailed information can be found on the Internet under www.epcos.com/orderingcodes HybridPack is a trademark...