Disc Type Capacitors with Lead High Voltage Ceramic Capacitors Commercial Grade

REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using these products. REMINDERS Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and product temperature does not exceed 150°C. Soldering corrections after mounting should be within...

Disc Type Capacitors with Lead Product compatible with RoHS directive Halogen-free High Voltage Ceramic Capacitors, Commercial Grade Overview of CK45 Series FEATURES These products shall conform to RoHS Directive due to lead(Pb) free of lead wire and internal solder material. Compatible with halogen-free external resin coating. PART NUMBER CONSTRUCTION Rated voltage Nominal capacitance Capacitance tolerance Temperature characteristics Series name Long lead Short lead Taping Please refer to P-5~10 about the product dimensions. OPERATING TEMPERATURE RANGE Temperature characteristics B E Temperature...

Overview of CK45 Series RECOMMENDED FLOW PROFILE Soldering Preheating Natural cooling Natural cooling Time t3 Over 60s. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading.

Taping Part No. dimensions * The part numbers are TDK’s standard specification products. The " " of the Part Number contains the lead type, G, N or V. Please refer to the details of each shape is shown below. Please refer to P-11 about the taping dimemsions. LIST OF STANDARD LEAD SHAPES Dimemsions in mm Symbol N Bulk/Short lead Symbol G Bulk/Long lead • TDK’s standard product is vertical kink. • TDK’s recommendation is short lead type with the symbol N for bulk products. Please be sure to request delivery specifications that provide further details on the features and specifications of the products...

Taping Part No. dimensions * The part numbers are TDK’s standard specification products. The " " of the Part Number contains the lead type, G, N or V. Please refer to the details of each shape is shown below. Please refer to P-11 about the taping dimemsions. LIST OF STANDARD LEAD SHAPES Dimemsions in mm Symbol N Bulk/Short lead Symbol G Bulk/Long lead • TDK’s standard product is vertical kink. • TDK’s recommendation is short lead type with the symbol N for bulk products. Please be sure to request delivery specifications that provide further details on the features and specifications of the products...

CK45 Type CAPACITANCE AND DIMENSIONS Temperature Characteristics: B (±10%) Rated Voltage Edc: 3kV Capacitance (pF) 100 150 220 330 470 680 1,000 1,500 2,200 Taping Part No. dimensions * The part numbers are TDK’s standard specification products. The " " of the Part Number contains the lead type, G, N or V. Please refer to the details of each shape is shown below. Please refer to P-11 about the taping dimemsions. LIST OF STANDARD LEAD SHAPES Dimemsions in mm Symbol N Bulk/Short lead Symbol G Bulk/Long lead • TDK’s standard product is vertical kink. • TDK’s recommendation is short lead type with...

CK45 Type CAPACITANCE AND DIMENSIONS Temperature Characteristics: E (+20, –55%) Rated Voltage Edc: 1kV Capacitance (pF) 470 1,000 2,200 4,700 10,000 Taping Part No. dimensions * The part numbers are TDK’s standard specification products. The " " of the Part Number contains the lead type, G, N or V. Please refer to the details of each shape is shown below. Please refer to P-11 about the taping dimemsions. LIST OF STANDARD LEAD SHAPES Dimemsions in mm Symbol N Bulk/Short lead Symbol G Bulk/Long lead • TDK’s standard product is vertical kink. • TDK’s recommendation is short lead type with the symbol...

CK45 Type CAPACITANCE AND DIMENSIONS Temperature Characteristics: E (+20, –55%) Rated Voltage Edc: 2kV Capacitance (pF) 470 1,000 2,200 4,700 10,000 Taping Part No. dimensions * The part numbers are TDK’s standard specification products. The " " of the Part Number contains the lead type, G, N or V. Please refer to the details of each shape is shown below. Please refer to P-11 about the taping dimemsions. LIST OF STANDARD LEAD SHAPES Dimemsions in mm Symbol N Bulk/Short lead Symbol G Bulk/Long lead • TDK’s standard product is vertical kink. • TDK’s recommendation is short lead type with the symbol...

CK45 Type CAPACITANCE AND DIMENSIONS Temperature Characteristics: E (+20, –55%) Rated Voltage Edc: 3kV Capacitance (pF) 470 1,000 2,200 4,700 Taping Part No. dimensions * The part numbers are TDK’s standard specification products. The " " of the Part Number contains the lead type, G, N or V. Please refer to the details of each shape is shown below. Please refer to P-11 about the taping dimemsions. LIST OF STANDARD LEAD SHAPES Dimemsions in mm Symbol N Bulk/Short lead Symbol G Bulk/Long lead • TDK’s standard product is vertical kink. • TDK’s recommendation is short lead type with the symbol N...

CAPACITORS OTDK Item Symbol - Remarks Body diameter D Depends on the specification of each product. Body thickness T Depends on the specification of each product. Pitch of component P 12.7±1.0 15.0±1.0 30.0±1.0 Including the slant of body Feed hole pitch Po 12.7±0.3 15.0±0.3 15.0±0.3 Excepting the tape splicing part Feed hole center to lead Pi 3.85±0.7 3.75±0.7 3.75±0.7 Feed hole center to component center P2 6.35±1.3 7.5±1.3 7.5±1.3 Lead-to lead distance F 5+0.8, -0.2 7.5±0.8 7.5±0.8 Measuring point is bottom kink Component alignment Ah 0±2.0 0±2.0 0±2.0 Including the slanting body due to bending...