Snow and flood water alarm system Object protection

The three 3 measuring stations can be installed up to 300 m away from the control unit with an easy plug cabling. Snow and flood water alarm system According to the official statement of the Registration office for Building products in Berlin, Technical Building Test authority, represented by Prof. Hoppe, an official building authority is not necessary. System The snow and flood water alarm system SAS-307 registers the existing snow or water load on a flat roof or on a saddleback roof with low incline. It sets off an alarm when the sensors of the free programmable values have been exceeded. For...

Evaluation electronics Features Power supply Control unit Overload warning: Security Police The measuring stations are electronic devices. In order to achieve a reliable performance of the integrated sensors and the evaluation unit, a pressure equalization provided by a special valve between the inner and outer air pressure is required. For installations over the roof film, this valve is integrated into the position stick, indicating the position of the electronic measuring unit in a snowy roof. The 50 cm, circular measuring station are made of anodized aluminium with IP 68 for use directly on...

Technical Data Measuring station Size: Aluminium anodised Protection type: Measuring range: +/- 2% in nominated load area Control Size: Power supply: Power consumption: Protection type: Accessories (optional) Connection cables: 30 m / 50 m / 100 m (with pre-fitted plug) (IP 69k) Mounting plate: 630 x 520 x 10 mm with 3 screw bolts and 3 straps Analogue Module: for analogue data output +/- 10 V (10 Volt ≙ 750 kg Load) Optical/acoustic signal lights with buzzer (red/yellow/green) Signal horn GPRS / GSM Modem (Alarm via SMS), up to 10 mobile numbers Accumulator back-up / emergency power supply up...