Mobile Personnel Protection GM-107cpu Occupational Safety Safety Technology

Mobile Personnel Protection GM-107cpu Regulation-compliant safety A number of regulations must be observed for the use of industrial trucks in narrow aisles. The Machinery Directive 2006/42/EC specifies the general protection level for machines.EN 13849 describes the safety functions for specific dangers, while DIN 15 185-2 defines the safety requirements and functions for the use of industrial trucks in narrow aisles. To ensure that the personnel protection system GM-107cpu always complies with the state of the art, it is revised and updated periodically approx. every three years. The personnel...

Basic functions The personnel protection system GM-107cpu monitors the driving range of the truck within the narrow aisle across the entire aisle width and over a length of approx. 1.3 to 1.5 times the braking distance. The monitoring function is provided by laser scanners installed in each of the load and drive directions,always monitoring in driving direction. When the vehicle stands still, both directions are monitored to ensure that any person approaching the truck will be detected. Should the protection field be violated, the truck will be decelerated automatically until it comes to a full...

Mobile Personnel Protection GM-107cpu/HP New technology – More comfort and safety HP stands for high performance with significantly higher comfort and greater safety during rack operation in the narrow aisle. Dynamic protection zones This is possible thanks to the use of a new laser technology. For mobile personnel protection, this means: • • • • Integrated dynamic protection zones Enhanced dust resistance Greater range Smaller design Thanks to these characteristics, the mobile personnel protection system adapts travel movements optimally – depending on the speed. The warehouse turnover is increased...

Performance characteristics • Active safety during every travel movement within the narrow aisle. Permanent and safe to the last metre of the narrow aisle (until the vehicle physically exits the aisle). Adapted to the speed of the vehicle. • 32 adjustable protection zones plus 32 definable warning zones are available for speed-dependent and customized monitoring. • Comfortable drive out of the aisle The dynamic, speed-dependent protection zones monitor not only the transfer aisle. Any persons present in the transfer aisle will not have any negative impact on the vehicle in the narrow aisle. •...

Mobile Personnel Protection GM-107cpu/V3 Traditional technology – Tried-and-tested in thousands of applications The traditional technology is backed by 15 years of experience. An all-time favourite among personnel protection devices, just like the “VW beetle”. It is the most commonly used personnel protection system. This is why we keep it in our program. Fixed protection zones Committed to a tradition of quality! Performance characteristics • Tried-and-tested technology The system has been successfully used for many years to ensure a high routine among many trained service technicians. Its long...

hightech control Collision protection in narrow aisles when multiple vehicles are used in a single aisle When multiple vehicles are used in a single narrow aisle, a safe protection zone with a range of up to 15 m is required for collision protection. This is achieved by the mobile personnel protection GM-17cpu/AK with special laser scanners. It fulfils the special requirements and regulations. Safety that offers productive benefits. Use in ex protection zones Explosion protection is a special category. The mobile personnel protection GM-107cpu/EX3G has been approved for zone 2; T4 in the individual...

Technical specifications Control unit Laser scanner Dimensions (WxHxD): Housing material: Aluminium die-cast Aluminium die-cast Supply voltage: 16 to 110 V DC with electrical isolation (operating range) Power consumption: Input fuse: Climatic conditions: Operating temperature: -10 °C to + 50 °C, optionally cold store suitable -30 °C Floating relay contacts as outputs and electrically isolated Inputs Mechanical strength: Frequency range: Device class: Alarm response time: 16 ms maximum Control lines: Ölflex-110/05, 0.75 mm² Supply lines: Ölflex-110/05, 1.0 mm² Sensor lines: UNITRONIC-LiYCY, 0.25...