- Catalogs
- TBi-Industries
- TBi Robot Torches RM 50W / RM 60W / RM 80W / RM 90W (water cooled)
TBi Robot Torches RM 50W / RM 60W / RM 80W / RM 90W (water cooled)
TBi Robot Torches RM 50W / RM 60W / RM 80W / RM 90W (water cooled)
- RM 50 W: Rated at 9.5 kW (270-300 A) with 1-circuit water cooling. Supports wire diameters of 0.8-1.2 mm and gas consumption from 8 l/min.
- RM 60 W: Rated at 13.0 kW (350-370 A) with 2-circuit water cooling. Supports wire diameters of 0.8-1.6 mm and gas consumption from 8 l/min.
- RM 80 W: Rated at 17.5 kW (370-500 A) with 2-circuit water cooling. Supports wire diameters of 0.8-1.6 mm and gas consumption from 6 l/min.
- RM 90 W: Rated at 19.0 kW (500-550 A) with 2-circuit water cooling. Supports wire diameters of 0.8-1.6 mm and gas consumption from 8 l/min.
- All models feature a rugged design with a stainless steel outer tube to maintain TCP stability under thermal stress and collisions.
- Changeable nozzle holders for RM 50 W and RM 60 W allow easy reconditioning.
- RM 80 W and RM 90 W have fixed nozzle holders for efficient cooling.
- Each torch model is available with options for direct clamping or quick-change adaptors.
- Consumables and spare parts must be ordered separately.
- Includes contact tips, tip holders, nozzle insulators, gas nozzles, and O-rings.
- Specific part numbers are provided for each component.
- All models comply with IEC 60974-7 standards.
- Warranty is valid only with original TBi consumables and spare parts.
Catalog excerpts
Technical data Robot welding torch TBi RM 50W Rating at 100% duty cycle Cooling method Wire diameter Technical specification WH cable assemblies, PowerPull wire feeders and quick-change Torch rating will be reduced when using pulse-arc power sources.
Open the catalog to page 1
Dimensions 67 Ø 31 R50 16 45° The TBi RoboMIG welding torch RM 50W has a very rugged design with a stainless steel outer tube. Therefore, the factory set TCP will neither be changed by thermal stresses during welding nor collisions. The compact and short torch head of the TBi RoboMIG RM 50G / 50W welding torches offers an exceptionally good accessibility. The changeable nozzle holder allows the end user to easily recondition the torch even after a long time of use. When ordering, please make sure to choose the correct type for either direct clamping or for the quick-change adaptor. The torches...
Open the catalog to page 2
Changeable nozzle holder for a long life of the torch Technical data Robot welding torch TBi RM 60W Rating at 100% duty cycle Cooling method Wire diameter WH cable assemblies, PowerPull wire feeders and quick-change Torch rating will be reduced when using puls-arc power sources. Technical specification
Open the catalog to page 3
Dimensions 74.7 22° Ø 28 Ø 31 265 15 250.9 130 45° The TBi RoboMIG welding torch RM 60W has a very rugged design with a stainless steel outer tube. Therefore, the factory- set TCP will neither be changed by thermal stresses during welding nor collisions. The changeable nozzle holder allows the end user to easily recondition the torch after a long time of use. When ordering, please make sure to choose the correct type for either direct clamping or for the quick-change adaptor. The torches are adjusted differently and must be used only for the corresponding mounting option. 214.8 Spare parts and...
Open the catalog to page 4
Technical data Robot welding torch TBi RM 80W Rating at 100% duty cycle Cooling method Wire diameter WH cable assemblies, PowerPull wire feeders and quick-change Torch rating will be reduced when using puls-arc power sources. Technical specification
Open the catalog to page 5
The TBi RoboMIG welding torch RM 80W has a very rugged design with a stainless steel outer tube. Therefore, the factory- set TCP will neither be changed by thermal stresses during welding nor collisions. This fact greatly simplifies maintenance The RM 80W has a fixed gas nozzle holder which guarantees a very efficient cooling of the gas nozzle. When ordering, please make sure to choose the correct type for either direct clamping or for the quick-change adaptor. The torches are adjusted differently and must be used only for the corresponding mounting option. Spare parts and consumables Open end...
Open the catalog to page 6
Technical data Robot welding torch TBi RM 90W Rating at 100% duty cycle Cooling method Wire diameter Technical specification WH cable assemblies, PowerPull wire feeders and quick-change Torch rating will be reduced when using pulse-arc power sources. Ordering information Torch neck without consumables Please order consumables sepa-
Open the catalog to page 7
Dimensions 74.7 Ø 30 22° Ø 31 265 15 250.9 130 45° The TBi RoboMIG welding torch RM 90W has a very rugged design with a stainless steel outer tube. Therefore, the factory set TCP will neither be changed by thermal stresses during welding nor collisions. This fact greatly simplifies maintenance of the welding cell. Due to large cross sections, this torch features specially good cooling properties. When ordering, please make sure to choose the correct type for either direct clamping or for the chick-change adaptor. The torches are adjusted differently and must be used only for the corresponding...
Open the catalog to page 8All TBi-Industries catalogs and technical brochures
MIG/MAG Welding Torches32 Pages
Robot Welding Torches44 Pages
MIG/ MAG Absaugbrenner2 Pages
TBi BRG 20002 Pages
TBi JetStream2 Pages
AUT 410 / 410S2 Pages
TBi Syntronic (reverse)2 Pages
TBi SP-G2 Pages
Overview TBi Aut torches4 Pages
TBi 6G2 Pages
TBi 5G2 Pages
TBi 3G / 3G DR2 Pages
- Chiller
- Liquid recirculation chiller
- Water recirculation chiller
- Arc welding torch
- Air-cooled welding torch
- MIG-MAG welding torch
- Water-cooled welding torch
- TIG welding torch
- Cutting torch
- Welding electrode
- Air-cooled cutting torch
- Manual cutting torch
- Plasma cutting torch
- Welding torch with fume extraction
- Welding wire feeder
- Robotized welding torch
- MIG welding torch
- Automated welding torch
- Automatic wire feeder
- Brazing torch