*mydirectindustry

Catalogs
TBi-Industries
TBi Robot Torches RM 50G / RM 60G / RM 70G

TBi Robot Torches RM 50G / RM 60G / RM 70G

1 / 6 PagesView full catalog

TBi Robot Torches RM 50G / RM 60G / RM 70G

Product catalog summary

Technical Specifications

TBi RM 50G: Rated at 60% duty cycle with mixed gas at 8.8 kW (approx. 250-280 A). Air cooling method with a recommended procedure of blowing out the torch with air for 10 seconds after welding. Supports wire diameters of 0.8-1.2 mm and gas consumption from 8 l/min. Weighs approximately 0.70 kg.
TBi RM 60G: Rated at 60% duty cycle with mixed gas at 10.5 kW (approx. 300-320 A). Similar cooling and gas specifications as RM 50G, but supports wire diameters of 0.8-1.6 mm and weighs approximately 0.87 kg.
TBi RM 70G: Rated at 80% duty cycle with mixed gas at 15.0 kW (approx. 350-400 A). Features two channels for gas flow and supports wire diameters of 0.8-1.6 mm. Weighs approximately 0.94 kg.

Design and Features

All models feature a rugged design with a stainless steel outer tube, ensuring stability against thermal stresses and collisions.
Changeable nozzle holders allow for easy reconditioning after prolonged use.
Compatibility with TBi WH flange, WH cable assemblies, PowerPull wire feeders, and quick-change adaptors.

Ordering and Spare Parts

Consumables and spare parts must be ordered separately, with specific part numbers provided for contact tips, tip holders, nozzle insulators, gas nozzles, and other accessories.
Ensure correct type selection for direct clamping or quick-change adaptors as torches are adjusted differently for each mounting option.

Standards and Compliance

All technical specifications comply with IEC 60974-7 standards.
Warranty is valid only when using original TBi consumables and spare parts.

Catalog excerpts

TBi Robot Torches RM 50G / RM 60G / RM 70G-1

Technical data Robot welding torch TBi RM 50G Rating at 60% duty cycle Cooling method Recommended cooling Wire diameter blow out the torch with air for 10 seconds after welding WH cable assemblies, PowerPull wire feeders and quick-change Torch rating will be reduced when using pulse-arc power sources. Technical specification

Open the catalog to page 1

TBi Robot Torches RM 50G / RM 60G / RM 70G-2

Dimensions 67 Ø 31 R50 16 45° The TBi RoboMIG welding torch RM 50G has a very rugged design with a stainless steel outer tube. Therefore, the factory- set TCP will neither be changed by thermal stresses during welding nor collisions. The compact and short torch head of the TBi RoboMIG RM 50G / 50 welding torches offers an exceptionally good W accessibility. The changeable nozzle holder allows the end user to easily recondition the torch even after a long time of use. When ordering, please make sure to choose the correct type for either direct clamping or for the quick-change adaptor. The...

Open the catalog to page 2

TBi Robot Torches RM 50G / RM 60G / RM 70G-3

Changeable nozzle holder for a long life of the torch Technical data Robot welding torch TBi RM 60G Rating at 60% duty cycle Cooling method Recommended cooling Wire diameter blow out the torch with air for 10 seconds after welding WH cable assemblies, PowerPull wire feeders and quick-change Torch rating will be reduced when using puls-arc power sources. Technical specification

Open the catalog to page 3

TBi Robot Torches RM 50G / RM 60G / RM 70G-4

Dimensions 74.7 R 85 Ø28 15 22° Ø31 265 250.9 130 45° The TBi RoboMIG welding torch RM 60G has a very rugged design with a stainless steel outer tube. Therefore, the factoryset TCP will neither be changed by thermal stresses during welding nor collisions. The changeable nozzle holder allows the end user to easily recondition the torch after a long time of use. When ordering, please make sure to choose the correct type for either direct clamping or for the quick-change adaptor. The torches are adjusted differently and must be used only for the corresponding mounting option. 214.8 Spare parts and...

Open the catalog to page 4

TBi Robot Torches RM 50G / RM 60G / RM 70G-5

ÍTBi Industries Technical data Robot welding torch TBi RM 70G Rating at 80% duty cycle Cooling method Recommended cooling Wire diameter blow out the torch with air for 10 seconds after welding WH cable assemblies, PowerPull wire feeders and quick-change Torch rating will be reduced when using puls-arc power sources. Technical specification

Open the catalog to page 5

TBi Robot Torches RM 50G / RM 60G / RM 70G-6

Dimensions 74.7 Ø 30 22° Ø 31 265 15 250.9 130 45° The TBi RoboMIG welding torch RM 70G has a very rugged design with a stainless steel outer tube. Therefore, the factoryset TCP will neither be changed by thermal stresses during welding nor collisions. The changeable nozzle holder allows the end user to easily recondition the torch after a long time of use. When ordering, please make sure to choose the correct type for either direct clamping or for the quick-change adaptor. The torches are adjusted differently and must be used only for the corresponding mounting option. 214.8 Spare parts and...

Open the catalog to page 6

All TBi-Industries catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list