*mydirectindustry

TBi BRG 2000

Product catalog summary

Technical Specifications:
The TBi BRG 2000 and BRG 2000 D are automatic torch cleaning stations designed for efficient maintenance of welding torches. They require an oil-free compressed air supply at 6 bar with an air flow of approximately 7 liters per second. The program control is pneumatic, with a start signal and unit-ready signal output of 24 V DC. The cleaning process takes approximately 4-5 seconds, and the dosage of anti-spatter liquid is adjustable. The BRG 2000 uses a drip-feed unit with a capacity of approximately 300 ml, while the BRG 2000 D uses a non-pressurized canister of about 1000 ml. The dimensions of the unit are 34.5 x 24.0 x 16.25 cm, and it weighs approximately 9.5 kg without the stand and wire cutter.

Wire Cutter DA 2000:
The wire cutter can be mounted on both BRG 2000 and BRG 2000 D units. It operates pneumatically at 6 bar and requires a supply voltage of 24 V DC. The wire cutter weighs 3.0 kg and is activated mechanically by the welding torch. It is designed to cut wire to a defined length, reducing ignition problems, with a maximum cutting capacity of 1.6 mm steel wire.

Ordering Information:
Various configurations and accessories are available for order, including the BRG 2000 with a drip-feed unit, BRG 2000 D with a Venturi-nozzle, and the wire cutter DA 2000. Cleaning reamers must be ordered separately, and the reamer size should be chosen based on the contact tip and nozzle used.

Cleaning Reamers for Gas Nozzles:
Reamers are available in various sizes to match different gas nozzles and contact tips. The inner diameter of the reamer should be 1 mm larger than the outer diameter of the tip, and the outer diameter of the reamer should be 1 mm smaller than the inner diameter of the nozzle.

Options:
The BRG 2000 can be equipped with a stand and wire cutter. The wire cutter is an accessory that can be ordered separately and mounted subsequently. It helps in reducing ignition problems by cutting the wire to a defined length.

Catalog excerpts

Ordering information BRG 2000 (with drip-feed unit) 531P101040 Anti-spatter liquid TipClean, 5I canister 392P000007 Cleaning reamers must be ordered separately. Automatic Torch Cleaning Station Technical data Automatic torch cleaning station BRG 2000 / BRG 2000 D Compressed air supply oil-free compressed air, 6 bar Necessary air flow approx. 7 l/sec. Program control pneumatic Signal output (unit ready) 24 V DC Cleaning time approx. 4-5 sec. Dosage of anti-spatter liquid adjustable Supply of anti-spatter liquid drip-feed unit, approx. 300 ml approx. 9.5 kg (without stand Start signal Supply voltage The wire cutter can be subsequently mounted to the units mechanical by welding torch pneumatic, operating pressure: 6 bar

Open the catalog to page 1

Options: BRG 2000 with stand and wire cutter The wire cutter may be ordered as accessory Cutting the wire to a defined length will reduce ignition problems. Its maximum cutting capacity is 1.6 mm wire (steel). The procedure is initiated by mechanically activating a valve with the gas nozzle of the torch. The reamers are easily exchangeable. Cleaning reamers for gas nozzles ► = Standard size of reamer included with the unit Other reamer sizes available. Reamer size must be chosen according to contact tip and nozzle used. The inner diameter of the reamer should be 1 mm larger then the outer diameter...

Open the catalog to page 2

All TBi-Industries catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list