FILTER / EXTRACTION / ENVIRONMENTAL - // TECHNOLOGY TRIPLE PROTECTION FOR // PEOPLE / ENVIRONMENT / MACHINERY

Assurance in occupational and health safety Our extraction and filter systems offer comprehensive protection thanks to high safety standards and certifications. Tested in accordance with DIN ISO 21904 (W3)they reliably filter the finest welding and laser fume particles as well as harmful dusts from the air. Compliance with the applicable standard has been verified through measurements conducted by ILK Dresden, Germany (Institute for Air and Refrigeration Technology). They are certified accordingly with W3 seal. DIN EN 60335-2-69 Annex AA divides dusts into three dust classes, depending on the...

Low-contamination filter change The system is used in the area of laser marking. It is also ideal for laser engraving and other applications with mediumdust levels. The filters used for the TFS series have been specially optimized with regard to handling and system service life. The SafeLine filter is housed in a closed filter case that can be easily sealed during filter change. This effectively protects the user from the contained filtrate. The filter design allows heavy particles to settle at the bottom of the filter without burdening the filter surface. The large filter surface, combined with...

Captures every harmful particle Pollutants don't stand a chance • Low-contamination dust disposal • Molecular sieve against gaseous pollutants • Pipe / flexible hose / extraction arm • Air recirculation or exhaust air pipe

Always full control over the system ^TBH’ Sub-D 25 interface A Start/Stop button B Manual speed control 1 Saturated filter notification 2 System status indicator 3 Speed setting indicator/operating hours counter 4 Temperature and turbine status indicator 5 Filter status indicator Powerful control electronics • Switch Start/Stop • "Filter full” early warning level (75 %) • Collective error output (rotation speed, temperature, "filter full” 100%) • External speed control • Parameterization access for activating special functions • Message cache

Applications Laser Technology Laser use in material processing—such as marking, engraving, cutting, or welding—releases ultrafine particles in the micrometer and nanometer range. Efficient extraction and filter systems are essential to ensure occupational safety.The W3-certified TBH extraction systems offer tested protection in accordance with DIN EN ISO 21904-1/-2 and TRGS 528. Automated Welding Automated welding, for example in battery cell production, releases extremely fine, sometimes carcinogenic particles.Extraction systems with W3 label, tested in accordance with DIN EN ISO 21904-1/-2,...

TFS220 ^TBH’ Delivery scope • fully assembled • Power cord

* More about W3, see catalog page 2 * More about W3, see catalog page 2 REPLACEMENT FILTERS REPLACEMENT FILTERS SafeLine filter SafeLine filter Particle filter Particle filter Activated carbon filter Activated carbon filter Filter mats for bypass Filter mats for bypass Note! For operation intended as a “W3” system, a signal module including volume-flow monitoring must be used or equivalent functions provided by the customer. For any questions, please contact your sales partner.

TFS230 ^TBH’ Delivery scope • fully assembled • Power cord

* More about W3, see catalog page 2 * More about W3, see catalog page 2 REPLACEMENT FILTERS REPLACEMENT FILTERS SafeLine filter SafeLine filter Particle filter Particle filter Activated carbon filter Activated carbon filter Filter mats for bypass Filter mats for bypass Note! For operation intended as a “W3” system, a signal module including volume-flow monitoring must be used or equivalent functions provided by the customer. For any questions, please contact your sales partner.

TFS250 ^TBH’ Delivery scope • fully assembled • Power cord

* More about W3, see catalog page 2 * More about W3, see catalog page 2 REPLACEMENT FILTERS REPLACEMENT FILTERS SafeLine filter SafeLine filter Particle filter Particle filter Activated carbon filter Activated carbon filter Filter mats for bypass Filter mats for bypass Note! For operation intended as a “W3” system, a signal module including volume-flow monitoring must be used or equivalent functions provided by the customer. For any questions, please contact your sales partner.

Measurement of all filters installed in the extraction system together

USB CONNECTION ^TBH’ APPLICATION DELIVERY SCOPE:Connection cable (incl. software) CABLE REMOTE CONTROL APPLICATION • "Filter full” notification • Start/Stop button • Rotation speed control • Switch-on status of the system: Standby operation DELIVERY SCOPE:Remote control (incl. cable) ELECTRIC FOOT SWITCH APPLICATION • Start/Stop button • Switch-on status of the system: Standby operation DELIVERY SCOPE:Foot switch (incl. cable) POWER CONNECTION HARTING APPLICATION

HARTING INTERFACE ^TBH’ APPLICATION CONNECTION CABLE USB HARTING DELIVERY SCOPE:Connection cable (incl. software)

DISTRIBUTOR SET Consisting of: 1x distributor (DN80), 2x reduction (DN80 - DN50) SIGNAL MODULE APPLICATION SPARK QUENCHER APPLICATION Installation:Depending on the application and size, the spark quencher can be mounted on the wall or a worktable using a special holder (including magnets, supplied) or with pipe clamps (please order separately). Signal module with input for volume flow monitoring (suitable for “W3” systems) Reduction of the system performance by approx. 20%

SPARK EXTINGUISHER - GRAVITY SEPARATOR APPLICATION TFS220 / TFS230 / TFS250 Note! Optional with Harting. SPARK QUENCHER APPLICATION TFS220 / TFS230 / TFS250 Note! Optional with Harting. VOLUME FLOW MONITORING APPLICATION TFS220 / TFS230 / TFS250 ATEX approval to EN1834 Exchangeable container with UN approval ATEX approval to EN 1834 Can reduce suction performance by up to 10%