TFS SERIES
1 / 20Pages

FILTER / EXTRACTION / ENVIRONMENTAL - // TECHNOLOGY TRIPLE PROTECTION FOR // HUMANS / ENVIRONMENT / MACHINERY

Assurance in occupational and health safety Our extraction and filter systems offer comprehensive protection thanks to high safety standards and certifications. Tested in accordance with DIN ISO 21904 (W3) and DIN EN 60335-2-69 Annex AA (dust class H), they reliably filter the finest welding and laser fume particles as well as harmful dusts from the air. The IFA confirms our systems in accordance with TRGS 528 in the “IFA positive list”. They are certified accordingly with W3and DGUVseal. DIN EN 60335-2-69 Annex AA divides dusts into three dust classes, depending on the hazardousness of the...

Application-dependent motor selection The TBH product range offers a selection of different motor concepts to ensure that the extraction and filter system is optimally suited to the specific application. This makes it possible to optimally adapt the design of the system to the conditions prevailing on site, for example: short or long extraction lines large or small line cross-sections coarse or fine particles single or multi-station extraction noise-sensitive environment industrial production hall Low-contamination filter change The system is used in the area of laser marking. It is also...

Captures every harmful particle Pollutants don't stand a chance • Low-contamination dust disposal • Molecular sieve against gaseous pollutants • Pipe / flexible hose / extraction arm • Air recirculation or exhaust air pipe

Always full control over the system ^TBH’ InterfaceSub-D 25 A Start/Stop button B Manual speed control 1 Saturated filter notification 2 System status indicator 3 Speed setting indicator/operating hours counter 4 Temperature and turbine status indicator 5 Filter status indicator Powerful control electronics • Switch Start/Stop • "Filter full” early warning level (75 %) • Collective error output (rotation speed, temperature, "filter full” 100%) • External speed control

Applications Laser technology The use of lasers in material processing such as marking, engraving, cutting or welding releases ultrafine particles in the µm and nm range. Efficient extraction and filter systems are essential to ensure occupational safety.The W3-certified TBH extraction systems offer DGUV-approved protection in accordance with DIN EN ISO 21904-1/-2 and TRGS 528. Automated welding Automated welding, for example in battery cell production, releases extremely fine, sometimes carcinogenic particles.Extraction systems with W3 label and DGUV certification, tested in accordance...

TFS500 ^TBH* Delivery scope • fully assembled • Power cord

Surcharge dust class H* Surcharge dust class H* *For more on W3 and dust class H, see catalog page 2 *For more on W3 and dust class H, see catalog page 2 REPLACEMENT FILTER REPLACEMENT FILTER Filter mats for bypass Filter mats for bypass SafeLine filter SafeLine filter Particle filter Particle filter Activated carbon filter Activated carbon filter Note! For operation intended as a “W3” system, a signal module including volume-flow monitoring must be used or equivalent functions provided by the customer. For any questions, please contact your sales partner.

TFS1000 ^TBH* Delivery scope • fully assembled • Power cord

Ordering data TFS1000 DESIGNATION *For more on W3 and dust class H, see catalog page 2

Measurement of all filters installed in the extraction system together

DELIVERY SCOPE:Connection cable (incl. software) CABLE REMOTE CONTROL % Figure 4: Remote control • "Filter full” notification • Start/Stop button • Rotation speed control • Switch-on status of the system: Standby operation DELIVERY SCOPE:Remote control (incl. cable) ELECTRIC FOOT SWITCH APPLICATION • Start/Stop button • Switch-on status of the system: Standby operation DELIVERY SCOPE:Foot switch (incl. cable) POWER CONNECTION HARTING APPLICATION

HARTING INTERFACE Installation:Depending on the application and size, the spark quencher can be mounted on the wall or a worktable using a special holder (including magnets, supplied) or with pipe clamps (please order separately). TFS1000 Power loss approx. -30% TFS500 Power loss approx. -20% (not suitable for TFS1000)

SPARK EXTINGUISHER - GRAVITY SEPARATOR APPLICATION TFS500 Note! Optional with Harting. SPARK QUENCHER APPLICATION TFS500 Note! Optional with Harting. SIGNAL MODULE APPLICATION ATEX approval to EN1834 Exchangeable container with UN approval Can reduce suction performance by up to 10%. ATEX approval to EN 1834 Can reduce suction performance by up to 10% Signal module with input for volume flow monitoring (suitable for “W3” systems)

FILTER RUPTURE MONITORING As standard, mounted on the right; left-side mounting optionally selectable. Please consult your sales representative. Capture element not included, please order separately.

EXTRACTION ARM SYSTEM 75 AL - SPARK QUENCHER APPLICATION EXTRACTION ARM SYSTEM 100 AL APPLICATION As standard, mounted on the right; left-side mounting optionally selectable. Please consult your sales representative. Capture element not included, please order separately. As standard, mounted on the right; left-side mounting optionally selectable. Please consult your sales representative. Capture element not included, please order separately.

Technical drawings

FILTER / EXTRACTION / ENVIRONMENTAL - // TECHNOLOGY TBH GmbH Heinrich-Hertz-Str. 8 75334 Straubenhardt Germany Tel. +49 (0) 7082 / 9473 0 info@tbh.eu // www.tbh.eu TRIPLE PROTECTION FOR // HUMANS / ENVIRONMENT / MACHINERY