FP 200-SERIES - 20 Pages

Add to MyDirectIndustry favorites
FP 200-SERIES

Catalog excerpts

FILTER / EXTRACTION / ENVIRONMENTAL // TECHNOLOGY HUMANS / ENVIRONMENT / MACHINERY

 Open the catalog to page 1

FP 200 Designed for larger dust volumes The FP 211 ATEX and FP 213 ATEX are equipped with dedustable antistatic filter cartridges, which enable the filters to be freed from dust by compressed air blasts. The units are thus particularly well suitable for applications in which large quantities of dry dust are extracted and achieve enormously long service lives compared to systems with saturation filters. Illustration similar Long service life due to effective filter cleaning The FP 211 and FP 213 are equipped with six dedustable filter cartridges of dust class M. The filter cartridges are...

 Open the catalog to page 2

Application-dependent filter equipment Upgrading with different filter modules is possible ex works. Depending on the application and occupational safety regulations, it may be necessary to add further filter stages downstream to the filter cartridges used as standard. To increase the separation efficiency, e.g. for carcinogenic substances, a separately monitored particle filter (H14) can optionally be connected downstream. A molecular filter (activated carbon/BAC) is also available for removal of odours and gases from the process air. Simple dust removal The dust generated during the...

 Open the catalog to page 3

Filter cartridge dedusting The FP 200 series is equipped with a special dedusting control system, which enables the filter cartridge to be automatically freed from dust and thus increase the filter service life enormously. Depending on the application, different options can be parameterized by the customer: Differential-pressure controlled dedusting (factory setting) . he system continuously measures the current filter saturation and automatically starts the dedusting cycle T when a set value is reached (factory setting: 75 % filter saturation). . Interval dedusting (parameterizable via...

 Open the catalog to page 4

Application-dependent Motor selection TBH offers a selection of different motor concepts in its product range to ensure the optimum suitability of the filter and extraction system for the respective application. This enables the system to be ideally adapted to the conditions on site, for example through: . Short or long extraction lines, . Large or small line cross-sections, . Coarse or fine particles, . single-spot or multi-spot extraction, . noise-sensitive environment, . industrial production hall. Double adsorption power Active carbon The adsorption of the gaseous substances takes place...

 Open the catalog to page 5

Inspiring control Continuous full control over the system . A - Start / Stop button . B - Manual power control . C - Manual start of filter-cartridge dedusting . 1 - Saturated filter notification . 2 - System status indication . 3 - ower-setting indication/ P Hour meter . 4 - Temperature and turbine-status indication . 5 - Filter-statusindication SUB-D 25 interface External control of the system Powerful control unit . Start / Stop button . "Filter full" pre-warning stage (75%) . Group-error output (speed, temperature, "filter full"100%) . External power control . arameterization access for...

 Open the catalog to page 6

Refilling work, packaging processes, feeding and conveying processes When materials are moved from one place to another, such as during packaging or transportation, this process can cause particles to be released. Especially since they are not visible to the human eye, the risk should not be underestimated. Particles can develop from turbulences. TBH filter and extraction systems safely remove these particles from the ambient air. Mechanical processing (grinding, deburring, milling, drilling, cutting) Processes such as grinding, deburring, milling, drilling or cutting generate dust, vapours...

 Open the catalog to page 7

System configuration EP200 series For easy configuration of your desired TBH filter and extraction system type FP 211 or FP 213, please observe the following steps: . A - Selection of basic model Depending on the application, select the suitable system based on its performance data (Fig. 2). Filter-housing module activated carbon/ BAC filter HUMANS / ENVIRONMENT / MACHINERY

 Open the catalog to page 8

Series configuration EP 200 series intake socket Select the intake socket of your system (position and diameter) from (Fig. 4). Please note any existing connections, e.g. to laser systems or similar. Please also pay attention to a reasonable dimensioning of the line cross-sections in relation to your application (air velocity, pressure loss). dedusting system The system is factory-delivered with the function "Differential-pressure controlled dedusting". When the filter saturation reaches the set value, the system automatically starts its dedusting cycle. The cleaning modes interval...

 Open the catalog to page 9

Technical data FP 211 Delivery scope: ■ Completely assembled (incl. the selected filter equipment) . Base stands (suitable for forklift trucks) ■ Crane eyelets (optional) ■ Power cord HUMANS / ENVIRONMENT / MACHINERY

 Open the catalog to page 10

WITH INTERMEDIATE MODULE BASIC MODEL A DESIGNATION FP 211 400V (3P+N) 50/60 Hz Filter-housing module, particle filter FILTER EQUIPMENT 6 x filter cartridges, antistatic SPARE FILTER Filter cartridge set, antistatic, pack of 6 Filter-housing module, activated carbon/BAC filter* * educes the extraction performance of the system by r approx. 20 %. Particle filter 2 x activated carbon/ BAC filter C INTAKE SOCKET Left* Rear side* * Indicates position only ** Sleeve dimension Differential-pressure controlled only after-run dedusting* * necessary for precoating Further cleaning modes can be easily...

 Open the catalog to page 11

Technical data FP 213 Delivery scope: ■ Completely assembled (incl. the selected filter equipment) . Base stands (suitable for forklift trucks) ■ Crane eyelets (optional) ■ Power cord

 Open the catalog to page 12

WITH INTERMEDIATE MODULE BASIC MODEL A DESIGNATION FP 213 230V 50/60 Hz Filter-housing module, particle filter Filter-housing module, activated carbon/BAC filter* FILTER EQUIPMENT 6 x filter cartridges, antistatic SPARE FILTER Filter cartridge set, antistatic, pack of 6 * reduces the extraction performance of the system by approx. 20%. Particle filter 2 x activated carbon/ BAC filter Differential-pressure controlled E PRECOATING SOCKET Standard Rear side* Further cleaning modes can be easily parameterised via the system's interface. only after-run dedusting* * Indicates position only **...

 Open the catalog to page 13

All TBH GmbH catalogs and technical brochures

  1. GL Desk-Series

    12 Pages

  2. CR-SERIES

    16 Pages

  3. FP 150 ATEX

    16 Pages

  4. TFS-SERIES

    18 Pages

  5. LN 600-SERIES

    20 Pages

  6. FPV 100

    10 Pages

  7. BF-Series

    24 Pages

  8. OEN-SERIES

    4 Pages