CR SERIES
1 / 20Pages

FILTER / EXTRACTION / ENVIRONMENTAL - // TECHNOLOGY TRIPLE PROTECTION FOR // HUMANS / ENVIRONMENT / MACHINERY

Ideal for clean rooms The CR series is suitable for contamination-free use in highly sensitive manufacturing processes. The systems are compact and can be easily integrated into your processes anywhere. They ensure functionality and safety both in clean room cabins (ISO 14644) and in clean rooms (VDA 19 and ISO 16232). Due to the contamination-free filter change up to ISO class 5 (DIN EN ISO 14646-1), they meet the increasing product and quality requirements. Tested according to DIN EN ISO 14644-1 / EC GMP guidelines and confirmed by the CCI for use up to ISO class 5 Possibility of process...

Low-contamination filter change Figure 1: Immersed pipe, system in operation Figure 2: Disengaged extraction pipe The filter cassette already contains both the extraction pipe and an extendable protective hose. Figure 3: Separating the protection hose. Figure 4: Remove the protective hose from the console. Replace the filter. After disengaging the extraction pipe, the protective hose can pull itself apart a little and overstretch the separation point. Using the provided cable tie, the protective hose can be tied off above the open air inlet of the filter cassette so that it remains...

Patented technology Contamination-free filter change The filter cassette already contains both the inlet pipe as well as an extendable transfer liner with side access. After disengaging the inlet pipe, the transfer liner can pull itself apart a little and overstretch the separation point. Using the provided Safe Seal clip, the transfer-liner can be tied off above the open air inlet of the filter cassette so that it remains shielded off dustproof from the environment. The rest of the transfer-liner initially remains on the tube for the time being. When inserting the new filter, pull the new...

Pressed together with locking pliers. Separate using cutting tool. Separated with use of cutting tool. SafeChange filter change Figure 5: Immersed extraction pipe, system in operation Figure 6: Disengaged extraction pipe Figure 7: Separation of the transfer liner after use and disposal of the filter with the “liner remainder”. Figure 8: Removing and disposing of the used filter. Figure 9: Installing a new and removing the old transfer liner. (1) Figure 10: Installing a new and removing the old transfer liner. (2)

Applications Use of clean room-compatible, low-contamination materials Clean rooms are defined by so-called clean room classes. The individual classes describe the maximum permissible concentration of airborne particles or germs or CFU (colony-forming units), which must not be exceeded in a clean room. It is possible to verify these classes using standardized measurement methods. This makes air quality a fixed parameter that documents the effectiveness of measures to maintain air quality in production facilities. CLEANROOM CLASS CN = MAXIMUM NUMBER OF PARTICLES PER M³ AND PARTICLE DIAMETER...

High-performance motor Electronically commutated motors for full power and less energy consumption. • Wide range input 100 - 240 V • Brushless motor; suitable for continuous operation • Electronic control for optimum motor characteristics curve and operating point

Always full control over the system ^TBH’ A Start/Stop button B Manual speed rotation regulation 1 Saturated filter indicator 2 System status indicator 3 Speed setting indicator/operating hours counter 4 Temperature and turbine status indicator 5 Filter status indicator A “Start/Stop” button B Manual speed control 1 Saturated filter notification 2 System status indicator 3 Speed setting indicator / operating hours counter 4 Temperature and turbine error indicator 5 Filter status indicator Powerful control electronics • Switch Start/Stop • “Filter full” early warning level (75 %) •...

Applications Laser technology The use of lasers in material processing such as marking, engraving, cutting or welding releases ultrafine particles in the µm and nm range. Efficient extraction and filter systems are essential to ensure occupational safety. Material handling and processing in controlled areas and clean rooms Integrating processes that release particles or gases is a major challenge, especially in critical environments. TBH extraction and filter systems in the CR series have been specially developed for use in clean rooms. The patented filter change system prevents the release...

^TBH* Delivery scope • fully assembled (incl. console and police filter) • with sealing frame for filter seal-seat testing • Power cord • Adapter for extraction arm or hose connection

Ordering data CR series SYSTEM / ISO CLASS DIN EN ISO 14646-1

Filter elements - Replacement filters For reduction of particulate emissions As a safety level for particularly hazardous substances STANDARD CONSOLE

Options CR-series ADAPTER FOR HOSE CONNECTION for mounting on standard console. Suitable hoses can be found in our accessories catalog (hose connection with wire hose clamp - no nipple necessary). for mounting on standard console. For suitable accessories, please contact us. for mounting on standard console. Suitable extraction arms with accessories can be found in our accessories catalog.

SAFE-SEAL TOOL FUNCTIONS: for the filter protection hose with side access. The SafeSeal clip is manually pushed over the bag and pressed together with the crimping pliers. The pressed clip is separated with the cutting tool. DELIVERY SCOPE:Connection cable (incl. software) POWER CONNECTION HARTING HARTING INTERFACE

CONNECTION CABLE USB HARTING APPLICATION DELIVERY SCOPE:Connection cable (incl. software)

Technical drawings Figure 13: Dimensions CR series

FILTER / EXTRACTION / ENVIRONMENTAL - // TECHNOLOGY TBH GmbH Heinrich-Hertz-Str. 8 75334 Straubenhardt Germany Tel. +49 (0) 7082 / 9473 0 info@tbh.eu // www.tbh.eu TRIPLE PROTECTION FOR // HUMANS / ENVIRONMENT / MACHINERY