General Post Height: 1196 mm (48 in) optional 1524 mm (60 in) Arm Length: 457 mm and 610 mm (18 in and 24 in) optional 762 mm (30 in) Granite: 1524 x 609.6 x 203.2 mm thick (60 x 24 x 8 in thick) Worktable Height: 838 mm (33 in) Machine Weight: 790 kg (1740 lbs) Air Bearing Load Capacity: 454 kg (1000 lbs) optional 1136 kg (2500 lbs) Radial/Axial accuracy: 0.125 ìm (5 ìin) Tilt Error Motion (coning): < 0.025 ìm/mm (< 1 ìin/in) Tilt & Center Tilt Adjustment: +/- 1° Center Adjustment: +/- 3 mm (0.125 in) Axis of Tilt: 95 mm (3.8 in) Above Worktable Work Table Diameter: 455 mm (18 in) optional 500 mm, 605 mm (19.6 in, 24 in) Gage Heads (4- Std, 8- optional) * Cartridge Style: 0.375 in OD, +/- 1 mm (0.040 in) travel Lever Style: +/- 0.30 mm (+/-0.012 in) travel Ultra Small: +/- 0.25 mm (+/- 0.010 in) travel Measurement resolution: 0.25 ìm (10 ìin) *Note: Other Gage heads available upon request Floor Plan Electrical Encoder: 1000 line Flat screen LCD Display Industrial Computer CE Approved Printer included Power: 120VAC-50/60hz or 220 VAC-50/60hz Power Consumption: 500VA Air Requirements: Pressure: 50 – 80 psig Air Usage: 1.5 scfm @ 60 psig, (42 l/min) SPS1000T Raised Table Profile Part Measurement and Stacking System. Convenient working height for piece part measurement and short stacks Aerospect SPS 1000T Specification NOTE: AMETEK Precitech pursues a policy of continual improvement due to technical developments. We therefore reserve the right to deviate from catalog specifications.

www.taylor-hobson.com Copyright© 2008 • Taylor Hobson Precision • ***_04/08 Taylor Hobson France Rond Point de l’Epine Champs Batiment D, 78990 Elancourt, France Tel: +33 130 68 89 30 Fax: +33 130 68 89 39 [email protected] Taylor Hobson Germany Postfach 4827, Kreuzberger Ring 6 65205 Wiesbaden, Germany Tel: +49 611 973040 Fax: +49 611 97304600 [email protected] Taylor Hobson Italy Via De Barzi 20087 Robecco sul Naviglio, Milan, Italy Tel: +39 02 946 93406 Fax: +39 02 946 93450 [email protected] Taylor Hobson Japan Sankyo Meguro Building 4-5-37, Kamiosaki,...