*mydirectindustry

typ 52

Product catalog summary

Overview: This document provides technical specifications for Typ 52 Shrink Discs designed to match Stiebel helical-bevel gears. It includes order information, design details, and a comprehensive table of dimensions and performance parameters.

Order Information: Shrink discs with a nominal diameter (d) less than 115 mm are galvanized and do not include washers. Discs with a diameter of 115 mm or more are painted and come with washers.

Design Specifications: The document outlines the design of the shrink disc, including tapped through holes up to a nominal diameter of 200 mm. Key components include screws, washers, and inner rings.

Key Parameters:

d [mm]: Nominal diameter of the shrink disc
dW [mm]: Shaft diameter
Mmax [Nm]: Maximal transmittable torque
D [mm]: Outer diameter
I [mm]: Length of the inner ring
e [mm]: Excess length
H [mm]: Width of the shrink disc
A [mm]: Pitch circle diameter
B [mm]: Attachment size
MA [Nm]: Tightening torque of the clamping screws
Z: Number of clamping screws
S: Size of the clamping screws
nmax [min-1]: Permitted rotational frequency
pN [N/mm2]: Average pressure to the hub
I [kgm2]: Moment of inertia

Material Strength: The minimum yield strength is specified as 290 N/mm² for solid shafts and 350 N/mm² for hubs.

Table of Specifications: The document includes a detailed table listing various models (e.g., 5206, 5208, etc.) with their respective dimensions, torque capacities, and other technical parameters. Each model is specified with its weight, maximum torque, and other critical dimensions.

Conclusion: The document provides essential technical data for selecting and utilizing Typ 52 Shrink Discs in conjunction with Stiebel helical-bevel gears, ensuring compatibility and performance efficiency.

Catalog excerpts

Typ 52 Shrink Discs matching Stiebel – helical-bevel gears Tapped through holes up to nominal diameter 200 Used symbols d < 115 Discs galvanized without washers Nominal diameter of the shrink disc Shaft diameter Maximal transmittable torque Outer diameter Length of the inner ring Excess length Width of the shrink disc Pitch circle diameter Attachment size Tightening torque of the clamping screws Number of clamping screws Size of the clamping screws Permitted rotational frequency Average pressure to the hub Moment of inertia d ≥ 115 Discs painted with washers Dimensions H & e in unlocked position Disc G Inner ring Solid shaft Order information: TAS Typ (z.B.: TAS 5226 ... further sizes on request) TAS Schäfer GmbH • Osterfeldstraße 75 • 5830

Open the catalog to page 1

Typ 52 Shrink Discs matching Stiebel – helical-bevel gears Typ

Open the catalog to page 2

typ 52

typ 52

Catalog excerpts

All TAS-Schäfer GmbH catalogs and technical brochures