Tapped through holes up to nominal diameter 140 Used symbols d [mm] dW [mm] Mmax [Nm] D [mm] I [mm] e [mm] H [mm] A [mm] B [mm] MA [Nm] Z S nmax [min-1] pN [N/mm2] I [kgm2] Nominal diameter of the shrink disc Shaft diameter Maximal transmittable torque Outer diameter Length of the inner ring Excess length Width of the shrink disc Pitch circle diameter Attachment size Tightening torque of the clamping screws Number of clamping screws Size of the clamping screws Permitted rotational frequency Average pressure to the hub Moment of inertia Variation from the standard shaft diameter dW Dimensions H & e in unlocked position Hexagon head bolts are used as standard. Upon request we provide all sized shrink discs with hexagon socket head bolts (Inbus). (See ordering information) Inner ring Disc G Solid shaft d ≥ 115 Discs painted with washers d < 115 Discs galvanized without washers (see Basics - Calculation) Ordering information: TAS 3093 - d (e.g.: TAS 3093-200 ... further sizes on request) with Inbus: TAS 3093 - d - Inbus (e.g.: TAS 3093-200-Inbus) TAS Schäfer GmbH • Osterfeldstraße 75 • 5830