Electromagnetic Vibrating Feeders Heavy-Duty The leading brand in vibration Manufacluring Licences «FMC Syntron ®

Models Therange of heavy-duty Eleclromagnetic Vibrating Feeders features twelve models covering ail flow-rate needs from 50 to 1.600 tons per hour. Each model can take a number of trough sizes and shapes. Bulk material feeding Operating Principle he TARNOS The operating principle of the Electromagnetic Feeders is based on a system of two masses that are elastically coupled. One of them, the moving mass, is the trough itself (1). The other, the fixed mass, is a strong cast part (2) housing the exciter coil and its magnetic circuit Thse masses are coupled by highly elastic steel leaf springs (3)....

TA/A/CS Hopper Desing The right design in the hopper is needed to achieve good material flow and to choose the feeder giving Ihe best relurn on the investment. The characteristics of the matehals handled, such as their particle sizet density and humidrty, are important in choosing the Feeder and the hopper configuration. The figure shows the recommended hopper design: ϕA: Real wall angle: 60° or more. 8: Front wall angle: 5° less than *A" ՕH: The height between the front outlet of the hopper (gte opening) and the bottom of the trough must be at least twice the largest particle of material, and...