TRISERT-3
5Pages

INSERT TECHNOLOGY FOR CRITICAL APPLICATIONS

Tappex have been successfully designing, developing and manufacturing many types of threaded inserts to meet the ever-changing demands of the plastics industry over the last 50 years. The wide range of self-tapping inserts under the Trisert brand were developed specifically to solve the requirements of both the established thermoset market and the increasing high-strength thermoplastic applications, where installation time and reliability are of prime importance. In line with their philosophy of continuous product development and in direct response to market demands, Tappex have introduced...

Due to the various mechanical characteristics, a precise hole size specification is imperative. Product Features The design combines three cutting facets with three shallow flutes offering balanced cutting and enhanced back out performance. A minimum hole depth of 1.2 x the insert length would normally be specified, with the insert installed to a maximum of 0.3mm sub flush to the surface. The Steel variant is case hardened and is offered with a zinc nickel trivalent passivated finish to meet the requirements of RoHS and provide good corrosion resistance. Installation may be by hand tool or...

PRINCIPAL ADVANTAGES Principal Advantages 1. Available in 316 Stainless Steel, 303 Stainless Steel and Steel Case Hardened Zinc Nickel, plated and Trivalent Passivated. 2. The reduced head provides a large bearing surface to support the load transmitted through the bolt. 3. Quicker installation when compared to similar self tapping inserts. • Stainless Steel parts have a greater helix angle 4. Free running internal thread. • No peripheral through holes or slots which can allow swarf into the bore of the insert • Cutting features designed to encourage swarf to move forward ahead of the...

EUROPE AB C EDGREN Hjälmarberget, Mosåsvägen, S-702 31 Örebro, Sweden. Telephone: +46 19 307450 Fax: +46 19 307459 e mail: kundinfo@c-edgren.se www.c-edgren.se BELUMA N.V. Tragel 3, 9300 Aalst, Belgium. Telephone: +32 53 60 63 70 Fax: +32 53 60 63 99 e mail: info@beluma.com www.beluma.be BIOTEK KFT. Jászberényi út 29. 1106 Budapest, Hungary. Telephone: +36 (1) 261 4733 Fax: +36 (1) 260 8635 e mail: biotek@biotek.hu www.biotek.hu FASTFIX Ltd. Units 3 & 7, Coes Road, Dundalk, Co. Louth, Ireland. Telephone: +353 (0) 42 933 5437 Fax: +353 (0) 42 33 3182 e mail: info@fastfix.ie www.fastfix.ie...