Cable and Pipe Entry Products New
40Pages

Cable and Pipe Entry Products Cable penetration by design KLIKSEAL® | RUTASEAL® | TSS | Design-A-Flange

News We are expanding the popular TSS product family. - - - - TSS is now available in additional sizes including M40 and PG9-PG29. See page 19 for more information. TSS Multi is the latest addition to the TSS family. You are now able to seal up to three cables in one opening. See page 21 for more information. TSS is also available in V0 rated material in all sizes and versions. See page 22 for more information. Rutaseal available in M63 in black, grey and light grey EPDM and in Chloroprene. See page 12 for more information.

Offices in Nässjö Sweden Offices in Nässjö Sweden Tapper Sealing Technology AB is one of the leading innovators in the cable and pipe entry market. We develop, manufacture and export innovative and flexible cable and pipe entry systems. The key focus of all our products is to offer added value to the end customer/user. Warehouse - and production facility in Nässjö, Sweden Tapper Sealing Technology (TST) started out as a manufacturing partner to Rutab, Sweden’s leading supplier of cable and pipe entries. From the very beginning, our main focus has been innovative production techniques and...

KLIKSEAL® KLIKSEAL® KLIKSEAL® is a revolutionary two-component grommet with cable anchorage – something completely new to the market. Through innovation and advanced production technology, we have designed a product that has many of the advantages found in a cable gland. Apart from the cable anchorage, KLIKSEAL® is compact, selfadjusting to its surrounding wall thickness, click-fixed in place, has a membrane seal, is waterproof, requires very little effort to install with its collapsible outer membrane, and saves up to 90% of your time. The installation of a KLIKSEAL® requires no tools and...

Product Benefits Cable Anchorage KLIKSEAL® is tested and certified to Cable Anchorage Type A - the same standard most cable glands are approved to. Compact design Designed to blend in with its surrounding. Product thickness is only 17-20mm, with a protrusion of 5,5 mm on the outside (M20-M25). A cable gland has a protrusion of 30-40mm. Klik KLIKSEAL® is an ergonomic product that requires no torque or force during installation. It simply “kliks” into place. Self adjusting to wall thickness The ability to self adjust to the wall thickness means there is no need for a lock-nut to install a...

KLIKSEAL® Product features TKS KLIKSEAL® Height of only 17-20 mm, 5,5 mm on the outside. Cable glands are approx. 30-40 mm. Handles large range of cable and pipe diameters. Installation time saving of up to 90%. Self-adjusting to wall thickness. Ergonomic installation ”Pushout” membrane Fixed in both directions when mounted. Space saving design Integrated tension relief KLIK = No material compression during installation. Rubber coated tension relief for protection of the cable mantle. Center the KLIKSEAL in the opening (from the inside), push evenly with both thumbs until it ”kliks” into...

KLIKSEAL® Material Mode of protection Temperature range Test standard Semko report IP67 and Cable Anchorage Type A* for Cable Ø mm * Cable Anchorage Type A, according to EN 50262. ** 8,1 - 8,9 mm only approved for tension relief. *** Varies depending on the thickness of material installed in. (1) Unstressed material.

KLIKSEAL® for thin materials Material Mode of protection Temperature range Test standard Semko report IP67 and Cable Anchorage Type A* for Cable Ø mm * Cable Anchorage Type A, according to EN 50262. ** 8,1 - 8,9 mm only approved for tension relief. *** Varies depending on the thickness of material installed in. (1) Unstressed material.

Examples of applications for KLIKSEAL® Enclosures and Cabinets Light fixtures

RUTASEAL® RUTASEAL® Rubber Grommets RUTASEAL® is very simple to use and demands no tools, which in turn means lower work cost. It requires no screwdriver or scissors to make the hole, which otherwise would endanger the IP-class seal. RUTASEAL® is SEMKO tested for IP67 internally and externally. The chloroprene version is also DNV approved. RUTASEAL® is produced in EPDM and Chloroprene in both PG and Metric. The seals are produced in black, light grey and grey. RUTASEAL® has a very high finish and the automatic method of production guarantees the same even and high quality on all products at...

RUTASEAL® EPDM Metric Temperature range Test standard Semko report EPDM - Halogen Free Suitable for holes in materials of Quick and simple assembly without the

RUTASEAL® Chloroprene Metric Material Mode of protection Temperature range Test standard Semko report DNV report

RUTASEAL LIGHT® EPDM Metric Material EPDM - Halogen Free Resistant to chemicals and weatherproof. Mode of protection Temperature range Test standard Semko report RUTASEAL LIGHT® RUTASEAL LIGHT® was originally designed for strip lighting manufacturers and similar applications. Less material makes it lighter and easier to install, while providing IP67 protection. At the same time it is also easier to pull it out of the opening. (1) Unstressed material.

RUTASEAL® EPDM PG Material Mode of protection Temperature range Test standard Semko report

Temperature range Test standard Semko report Resistant to chemicals, ageing and Suitable for holes in materials of Quick and simple assembly without the

TSS TSS The TSS is the latest addition to the TST grommet range. What makes the TSS different from existing products on the market are the built-in features that you do not find in this otherwise relatively simple product. TSS handles an exceptionelly large cable span. It is the only “simple” grommet manufactured in a rubber-like material, and the only TPE-based end-plug. With the ”pushout” membrane you always have a round opening and are guaranteed to have IP67. The TSS is equipped with a sock that closes tight around the cable and allows for it to be moved around like a ”joy-stick” in the...