SYSTEMS AND ACCESSORIES FOR PUMPS 2025 | 1 » All about your flow

We began our journey in 1980 in Kungälv, a small town on the Swedish west coast, as a family company with an ambition to one day become a global player on the pump market. Since the foundation, we have taken pride in delivering a wealth of knowledge and passion for pumps to the industry, whilst supplying a wide range of premium products for various industrial applications. Over the years, the company has developed into a global Tapflo Group with branches and distributors present in nearly every region of the world. One thing did not change - we are still a family company. Our solutions are designed...

Active Pulsation Dampeners DT ACTIVE PULSATION DAMPENERS The active pulsation dampener is the most efficient way to remove pressure variations on the discharge of the pump. Tapflo pulsation dampener works actively with compressed air and a diaphragm, automatically setting the correct pressure to minimise the pulsations. Material: PE, PTFE, Aluminium, Stainless Steel 316 Max. pressure: 16 bar AIR FILTER REGULATOR | NEEDLE VALVE | WATER SEPARATOR & ON-OFF VALVES There are many benefits of using an individual filter regulator and needle valve for an AODD pump. Filter-regulator provides right air...

Mobile Pump Units HYGIENIC & INDUSTRIAL TROLLEYS The portability of the units allows easy movement to various locations. This means almost limitless application. Mobile pump units are available in both hygienic and industrial designs. The great advantage is the compatibility with the majority of Tapflo pumps range. Moreover, it is possible to compose the trolley to your own needs by using a number of accessories such as air preparation units, ON-OFF switches, frequency inverters or hose holders. Baseplates & Wall Supports UNIVERSAL BASEPLATES WALL SUPPORTS Universal Baseplates and Wall Supports...

Sound & Thermal Insulating Cover HYGIENIC COVERS INDUSTRIAL COVERS The stainless steel hygienic covers are dedicated to use with Tapflo AODD Pumps. The cover boxes are robust, rigid and can be closed tightly and firmly. Lined up with a dedicated insulation mat, hygienic covers are a perfect solution reducing operation noise level and insulating pumps from ambient thermal conditions. Industrial covers from Tapflo combine user-friendly design with high quality materials creating a durable solution that will operate for years in almost every application. The covers are tailor-made to fit a wide...

Soft-starts Valve & Pneumixer SOFT-STARTS VALVE An abrupt opening of the compressed air supply to the pump, e.g. by a solenoid valve, may cause pump damage or unwanted pressure peakes in the pipe system. The softstart valve connected in compressed air supply line, slowly opens itself to start pump gently. The Peumixer is an additional equipment to operate with an AODD pump. It is used in industries where raw materials, stored in drums and containers, settle out overtime and need to be mixed prior to use. The device shorten time waste, mess and expense by eliminating a need for pumping to separate...

AT© PDFM (DIAPHRAGM FAILURE PROTECTION) PDRN (DRY RUN & STOP) Barrier pumps (TB) have an additional set of diaphragms used to backup the primary diaphragms. In case of a breach the liquid remains inside the pump, instead of leaking out through the air exhaust. The Guardian monitors the pressure between the primary and secondary diaphragms, stopping the pump if the pressure increases above the set point. - Safe & reliable operation when pumping hazardous liquids - Saves expensive products The Guardian monitors the fluid discharge pressure of the pump, stopping it if the pressure falls below the...

EDRH (ELECTRONIC DRY RUN AND DEAD HEAD PROTECTION SYSTEM) Electronic Dry Run and dead Head protection is a device that guarantees reliable, effective and safe operation of the AODD pumps. At the same time, the consumption of the compressed air is reduced, which means lower operating cost. Benefits: - Elongates the lifetime of the pump's diaphragms - Turns off the pump in case of the accomplished task (i.e. unloading of a tank) - Limits the discharge pressure - Indicates the pressure values Pneumatic Level Control TPUK-LM (MANUAL START) TPUK-LA (AUTOMATIC START) The system controls an AODD pump...

Pneumatic Batch Control TPUK-BP (STROKE COUNTING) TPUK-BT (TIME BATCH) The Pneumatic Batcher is a fully pneumatic predetermining counter system which records pump strokes as a series of low-pressure pulses from the air exhaust of an AODD pump, stopping the pump once a pre-set number of strokes have been recorded, thus controlling the volume of product dispensed by the pump. The Pneumatic Timed Batcher is a fully pneumatic run time controller for use with an AODD pump. The pump can be started locally or remotely, stopping automatically once the set time has elapsed, thus controlling the volume...

Accesories for Pneumatic Systems TPUK-PA (AUDIBLE ALARM) TPUK-SS (START/STOP UNITS) The audible alarm is an option for use with the Guardian systems. It will sound when the alarm output of the Guardian is triggered due to either a diaphragm break (PDFM), pump dry running (PDRN & PDRS) or a dead head situation (PDHS). Start/Stop Units can be integrated into diaphragm pump systems and can also be used in conjunction with other pneumatic systems such as the Batch Controller (TPUK-BP), Timed Batcher (TPUK-BT) and Manually Started Level Control System (TPUK-LM). These units provide increased functionality...

Accessories for Centrifugal Pumps MOTOR COVERS FREQUENCY INVERTERS Hygienic motor covers are dedicated to be used with centrifugal pumps from CT and CTX range. The hygienic motor shroud in AISI 304L protects the motor against flooding, deposition of dirt, or spraying water during pump cleaning procedure. Frequency inverters (also termed variable frequency drives or AC drives) are used to control AC motor speed and torque by varying motor input frequency and voltage. They can also be used to protect electrical motor from overloading. CONTROL PANELS CUSTOMIZED SOLUTIONS & SYSTEMS Control panels...