video corpo

Steinle Filter Press Pumps


Catalog excerpts

Steinle Filter Press Pumps - 1


Open the catalog to page 1
Steinle Filter Press Pumps - 2

Since 1980, we have taken pride in delivering a wealth of knowledge and passion for pumps to the industry, whilst supplying a wide range of premium products for various industrial applications. We deliver the best solutions and support for a range of Hygienic, Sanitary and Industrial applications, while going above and beyond to provide excellent service to our customers worldwide. Tapflo is a family-owned company, founded in Kungälv, Sweden. Over the years, the company has developed into a global Tapflo Group with branches and distributors present in nearly every region of the world. Our...

Open the catalog to page 2
Steinle Filter Press Pumps - 3

The STEINLE Filter Press Pumps The STEINLE pump is a single or double acting piston diaphragm pump with a hose as the diaphragm. The liquid transferred to the filter press requires exceptionally high performance pumps. They have to supply large quantities of liquid into the empty press as well as small quantities at high pressure when the filter press is filled. This pressure must be maintained for a long period of time. The pumps are available in FP & FH series with different pressure transmission: » FP - 1 : 2.4 y> FH - 1 : 3.3 Self-regulating for filter press applications By using...

Open the catalog to page 3
Steinle Filter Press Pumps - 4

Working principle Discharge Discharge valve Compressed air is moving the pneumatic piston which is attached to the hydraulic piston. The hydraulic piston is moving the hydraulic liquid which is acting on the diaphragm hose which also restores its original shape. While the hose is compressed, the slurry inside is displaced and flows out. Stroke direction Hose diaphragm Ball valves on the top and bottom of the hose ensure that the flow is in one direction only. Hydraulic liquid Suction valve Suction The two extreme deformation conditions of the hose. The installation All STEINLE pumps are...

Open the catalog to page 4
Steinle Filter Press Pumps - 5

Performance curves The performance curves are based on water at 20 °C. Other circumstances might change the performance. Example FP 40 With an existing pressure of 5 bar in compressed air supply, the pump delivers 3,5 m³/h at approximately 4 bar. Air consumption will be 0,65 m³/min in this case. The amounts given apply to water at 20 °C, without suction lift. With higher viscosity liquids and a suction lift, a reduction in the flow rate may occur. HEAD PSIG mWC 260 180 240 160 220 200 140 180 120 160 140 100 120 80 100 60 80 60 40 40 20 20 Air pressure (bar) Air consumption (Nm3/min, SCFM)...

Open the catalog to page 5
Steinle Filter Press Pumps - 6

Pump FP/FH 25 Pumps FP/FH 40, 50, 80 Dim. Dimensions in mm (where other is not indicated) Dimensions in inch (where other is not indicated) Technical data Data Pump size FP/FH 40 FP/FH 50 General characteristics Max capacity [m3/h] / [US gpm] 2.5 / 11 Max discharge pressure [bar) / [psi] Pressure transmission Max air pressure [bar] / [psi] Displacement* [l] / [cu in] 0.7 / 42.7 Max suction lift dry [m] / [Ft] Max suction lift wet [m] / [Ft] Medium operating temperature [°C] / [°F] Allowable ambient temp range [°C] / [°F] Control power Protection class Max size of solids 0 in [mm] / [in] 10...

Open the catalog to page 6
Steinle Filter Press Pumps - 7

Pump code I. Pump standard VIII. Series F = Flange acc. to EN 1092-1 Type 11 Face B1 (std. on Fx50, Fx80 and all PP pumps) VII. Valve ball material FP = Standard pump FH = High-pressure pump A = Flange acc. to ANSI 16.5B Class 150 S = AISI 316L Stainless steel VIII. Design series G = BSP female thread (G 1.1/2" std. on Fx25 and Fx40 metal pumps) C = Neoprene (CR) with steel core Accessories In addition to the pumps, wide range of useful accessories are available: Pulsation dampener Cost worthy pulsation dampeners with 9 liters volume and an operating pressure of 16 bar are suitable for all...

Open the catalog to page 7
Steinle Filter Press Pumps - 8

Sweden Filaregatan 4 | S-442 34 Kungalv Tel: +46 303 63390 Fax: +46 303 19916 E-mail addresses: Commercial questions: Orders: Tech support: Tapflo products and services are available in 75 countries on 6 continents. Tapflo is represented worldwide by own Tapflo Group Companies and carefully selected distributors assuring highest Tapflo service quality for our customers' convenience. AUSTRALIA | AUSTRIA | AZERBAIJAN | BAHRAIN | BELARUS | BELGIUM | BOSNIA | BRAZIL | BULGARIA | CANADA | CHILE | CHINA | COLOMBIA | CROATIA | CZECH REPUBLIC |...

Open the catalog to page 8

All Tapflo catalogs and technical brochures

  1. PUMPS

    8 Pages


    8 Pages