FILTER PRESS PUMPS 2020 | 1 www.tapflo.com All about your flow

We began our journey in 1980 in Kungälv, a small town on the Swedish west coast, as a family company with an ambition to one day become a global player on the pump market. Since the foundation, we have taken pride in delivering a wealth of knowledge and passion for pumps to the industry, whilst supplying a wide range of premium products for various industrial applications. Over the years, the company has developed into a global Tapflo Group with branches and distributors present in nearly every region of the world. One thing did not change - we are still a family company. Our solutions are designed...

Compact station for feeding filter presses Features & Benefits Optimal pressure amplification The output pressure can be regulated up to 2:1 of input pressure Robust design Best durability thanks to balanced diaphragms and high pressure pump concept Plug & Play The pressure booster is mounted directly on the pump making it a small and compact unit that can be assembled on the filter press Special design Using of reinforcement plates, pinscrews and a hybrid air valve ensures reliable and maintenance free operation under high pressure Simple operation principle Due to its working principle the...

Typical filtration curve of a chamber filter press 16 14 Pressure / Flow At the beginning of slurry transfer to the filter press the pump operates with high flow but low pressure as the chamber of the filter press is empty. Over time, when the filter press is filled, solids block the filter orifices therefore pressure builds up and simultaneously flow rate decreases gradually. At the end, when the filter press is filled, flow is reduced to zero (the pump stops) and pressure is retained thus compressing the filter cake. Filtration time The TF series is equipped with a special, hybrid air valve...

Delivery scope Reinforcement plates (plastic pumps) Special pin screws (metal pump) Complete pressure booster Two manometers for indication of input and output pressure Pressure regulator Quick air connection for air supply Mounting plate with screws Air connection between the pump and the booster Complementary productsDTF dampener Air treatment system Our offer consists also of Tapflo active pulsation dampener prepared to work under higher pressure. The pulsation dampener is the most effective way to remove pressure variations on the discharge of the pump ensuring a stable and continuous flow...

The performance curves are based on water at 20 °C. Other circumstances might change the performance. A flow of 30 liters/minute is desired. The discharge pressure is calculated to 60 mWC. It requires air pressure of 6 bar and will consume approximately 0.80 Nm3 of air per minute. * = Max flow is obtained when using a bypass around the pressure booster at low pressure. ** = Based on pumps with PTFE diaphragms. Pumps with EPDM diaphragms have higher volume per stroke. ** = With stainless steel valve balls, other materials may reduce suction. Please consult us in this matter.

Plastic pumps Stainless steel pumps Aluminium/cast iron pumps

E-mail addresses: Commercial questions: [email protected] Orders: [email protected] Tech support: [email protected] 03 O (D □ We began our journey in 1980 in Kungalv, a small town on the Swedish west coast, as a family company with an ambition to one day become a global player on the pump market. Since the foundation, we have taken pride in delivering a wealth of knowledge and passion for pumps to the industry, whilst supplying a wide range of premium products for various industrial applications. Over the years, the company has developed into a global Tapflo Group with branches and distributors...