Safety Interlock Catalog
20Pages

CONTENT For additional information and our complete product line of non-contact interlocks please visit our website at www.tapeswitch.com or call our sales team at 1-800-234-8273. pg. 3-6 F-SERIES ELECTRONIC SAFETY SYSTEM This uniquely flexible, DIN rail mounting safety control unit is capable of monitoring up to 30 safety switches. The electronic non-contact safety switches are easy to install and tolerant to misalignment and guard wear. Together, they provide a system that can be used in harsh environments or where long term reliability is required. pg. 6 - 7 pg. 8-9 pg. The F-SERIES...

CONTENT For additional information and our complete product line of trapped key interlocks please visit our website at www.tapeswitch.com or call our sales team at 1-800-234-8273. pg. 13 - 14 ACCESS INTERLOCKS Access interlocks provide a trapped key method of obtaining access to numerous types of doors, hatches and panels. 14 - 15 MECHANICAL BOLT INTERLOCKS Bolt interlocks are widely used for the interlocking of switchgear. The bolt is often pg. 15 pg. used for the physical blocking of levers or rotary switches via a cam mechanism. CONTROL POWER ISOLATION INTERLOCKS Key driven electrical...

F-SERIES ELECTRONIC SAFETY SYSTEM F-SERIES SAFETY CONTROL UNIT The FM1 is the master control module for all F-Series safety systems. It contains a regulated power supply, 2 safety contact outputs (PGC), external/internal relay monitoring circuit, system indication, along with the input for one safety switch sensor, and its indication outputs. The FM1 and one safety switch sensor are all that is required for a system monitoring one guard. Simply clip the FM1 into a suitable control cabinet, fit the safety switch sensor to the guard and connect the supply and the volt free control contacts....

F-SERIES ELECTRONIC SAFETY SYSTEM F-SERIES FMA SAFETY SWITCH The F-TYPE safety switches are a fully electronic, completely encapsulated, fail-safe switches designed to work in harsh conditions. This electronic safety switch is designed for use with the F-Series safety control units and provides not only long term reliability, but also a consistent switching distance (10 mm +/- 0.5). This makes the F-TYPE safety switch quick to install, tolerant to misalignment, and capable of providing years of trouble free operation. The dynamic signaling techniques continuously monitor each safety switch....

F-SERIES ELECTRONIC SAFETY SYSTEM F-SERIES FMT SAFETY SWITCH The F-TYPE safety switches are a fully electronic, completely encapsulated, fail-safe switches designed to work in harsh conditions. This electronic safety switch is designed for use with the F-Series safety control units and provides not only long term reliability, but also a consistent switching distance (10 mm +/- 0.5). This makes the F-TYPE safety switch quick to install, tolerant to misalignment, and capable of providing years of trouble free operation. The dynamic signaling techniques continuously monitor each safety switch....

F-SERIES ELECTRONIC SAFETY SYSTEM F-SERIES BMR SAFETY SWITCH The B-TYPE safety switches have all the advantages of the F-TYPE safety switches built into a smaller ABS housing. The same electronic switching provides not only long term reliability but also keeps the excellent switching distance (10 mm +/- 0.5), making the B-TYPE safety switch just as easy to install, tolerant to misalignment, and capable of providing years of trouble free operation. The smaller ABS housing makes the B-TYPE safety switches suitable for light-weight guarding such as Perspex and Makralon. However, using the same...

SSS ELECTRONIC SAFETY SWITCHES SSS ELECTRONIC SAFETY SWITCH The SSS is a tamper-proof, stand-alone safety switch that can be used to switch relays, contactors, or safety relays directly. Only a SSS actuator will operate the SSS switch correctly. By removing the need for a separate control unit, we have made it possible to use our top of the line electronic switching technology in smaller, simpler safety systems. With the SSS you get the reliability of the electronic safety system with the ease of installation of a standard magnetic switch, like the MAGNASAFE. Suitable for single or dual...

ISIS MAGNETIC SAFETY SYSTEM ISIS-4 SAFETY CONTROL UNIT The ISIS-4 Safety Control Unit can monitor up to 4 ISIS safety switches. It has an easy to install, 35 mm DIN rail mountable housing provides 2 x safety and 1 x auxiliary output contacts (4 A / 230 VAC). Indicator LED’s in the ISIS-4 lid show the number of gates that have been selected, gate status, power and run. A DIP switch located beneath the lid is used to select the number of active safety switches (Note: The selector switch and number of safety switches must match or the control unit will not operate.) The coded magnetic safety...

ISIS MAGNETIC SAFETY SYSTEM ISIS EXTENDER MODULE The ISIS-E Extender module adds 5 safety switch inputs to an ISIS control unit (ISIS-2 or ISIS-4). Multiple ISIS-E extender modules can be connected together into one system, making it possible to monitor a large number of machine guards or to add gates to an existing system at a later date. The ISIS-E requires 24 VAC/DC supply and a simple 2-wire connection from the ISIS-E to any active ISIS safety switch input. LED indication is available for all gate switches showing guard status. General Specifications Control Category Supply Voltage...

MAGNASAFE MAGNETIC SAFETY SWITCHES MS5 SAFETY SWITCH The MS5 is a low cost, compact, IP67 safety switch, with 2 safety contacts and 1 indicator contact, the MS5 is suitable for use with most modern, low in-rush current safety relays. Easy to install, and ideal where space is limited on small light weight guards, The design of the MS5 with fixing centers through the body of the switch, make it a tough safety switch, which can withstand regular use in harsh conditions. Available for DC switching, the MS5 is easy to integrate into most safety applications. Being a non-contact safety switch, it...

MAGNASAFE MAGNETIC SAFETY SWITCHES MS7 SAFETY SWITCH The new MS7 adds an additional level of security. The coded magnetic operation of the MS7 is even more robust and secure for non-contact safety switch applications. It is fully sealed to IP67, and has a 10 mm switching distance, is easy to install, and ideal for food processing packaging applications. General Specifications Operation Contacts Operating Distance Contact Rating Operating Temperature Construction IP Rating Cable Lengths Features Approvals Coded magnetic 2 N/O + 1 N/C 7 mm ON, 12 mm OFF 300 mA, 24 VDC -10 to 55°C Red ABS,...