*mydirectindustry

Tap Magic EP-Xtra Aerosol

Product catalog summary

Identification: Tap Magic EP-Xtra Aerosol is a cutting fluid for metal, identified by product code 100012EL. It complies with HCS 2012 standards in the US and WHMIS 2015 in Canada. The supplier is The Steco Corporation, Little Rock, AR, US.

Hazard Identification: Classified as a Category 1 flammable aerosol with compressed gas, it may cause skin sensitization and is toxic to aquatic life. Key hazards include extreme flammability, explosion risk if heated, and long-lasting aquatic toxicity.

Composition: Contains petroleum distillates, chloro derivatives, propane, butane, and sulfurized pentene. Exact concentrations are trade secrets.

First Aid Measures: For eye contact, rinse with water for 20 minutes. For skin contact, wash with soap and water. If inhaled, move to fresh air and seek medical attention if symptoms persist. Ingestion requires mouth rinsing and medical attention if adverse effects occur.

Fire-Fighting Measures: Extremely flammable. Firefighters should use protective equipment and suitable extinguishing agents. Containers may burst if heated, posing explosion risks.

Accidental Release Measures: Evacuate area, avoid personal risk, use spark-proof tools, and prevent entry into waterways. Collect spillage with non-combustible absorbent materials.

Handling and Storage: Store in a cool, dry, well-ventilated area away from ignition sources. Use explosion-proof equipment and avoid environmental contamination. Personal protective equipment is recommended during handling.

Exposure Controls/Personal Protection: Occupational exposure limits are provided for components. Use chemical-resistant gloves, safety eyewear, and appropriate body protection. Ensure emissions comply with environmental legislation and use adequate ventilation.

Physical and Chemical Properties: Liquid with mild odor and amber color. Vapor pressure of 0.93, very slightly soluble in cold water, insoluble in hot water. Kinematic viscosity of 24 mm²/s at 40°C, auto-ignition temperature of 260°C, VOC content of 13.4% (w/w).

Stability and Reactivity: Stable under normal conditions, no hazardous decomposition products expected. Reactive with oxidizing materials.

Toxicological Information: Acute toxicity data indicates inhalation of butane can be hazardous. No significant effects for inhalation, ingestion, or eye contact, but skin contact may cause an allergic reaction. Classified as an aspiration hazard.

Ecological Information: Low bioaccumulative potential, no significant adverse ecological effects noted. No data on toxicity, persistence, or soil mobility.

Disposal Considerations: Minimize waste generation, comply with environmental legislation. Dispose of surplus products via licensed waste disposal contractors, encourage recycling of waste packaging.

Transport Information: Classified as a flammable aerosol under transport regulations. Transport in closed, upright containers and ensure transporters are aware of emergency procedures.

Regulatory Information: Subject to U.S. federal regulations, including the Clean Air Act, and listed under several state regulations. No Safe Harbor warning required under California Prop. 65.

Other Information: Includes a history of revisions and a key to abbreviations used throughout the safety data sheet.

Specifications and Classifications: Classified as Category 1 Flammable Aerosol and Compressed Gas under pressure, Category 1 for Skin Sensitization, and Category 2 for both Acute and Long-term Aquatic Hazards.

Procedures and Responsibilities: Customers are responsible for determining the PPE code for the material, with guidance available in the HMIS® Implementation Manual.

Standards and Recommendations: Use information with caution as all materials may present unknown hazards. The final determination of material suitability is the user's responsibility.

Additional Information: Includes contact information for KMK Regulatory Services Inc. and references to additional resources for more information on HMIS® ratings and PPE codes.

Catalog excerpts

Conforms to HCS 2012 - United States Compliant SDS for GHS - Canada WHMIS 2015 SAFETY DATA SHEET Tap Magic EP-Xtra Aerosol Section 1. Identification GHS product identifier : Tap Magic EP-Xtra Aerosol Product code Other means of identification Product type Relevant identified uses of the substance or mixture and uses advised against Identified uses Cutting Fluid for Metal. Supplier's details : The Steco Corporation 2330 Cantrell Road Little Rock 72202, AR, US Phone: 501-375-5644 Toll free: 800-643-8026 Fax: 501-374-4278 Email: [email protected] Website: tapmagic.com KAR Industrial 6877 Edwards Boulevard Mississauga, Ontario L5T 2T9 Phone: 800-387-3127 Emergency telephone number (with hours of operation) : Chemtel, Inc. 800-255-3924, +1 (813) 248-0585 24 hours Contact Email: [email protected] Registration date: 2020-09-01 Registration number: MIS0003987 Section 2. Hazard(s) identification OSHA/HCS status Classification of the substance or mixture : This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200). : FLAMMABLE AEROSOLS - Category 1 GASES UNDER PRESSURE - Compressed gas SKIN SENSITIZATION - Category 1 AQUATIC HAZARD (ACUTE) - Category 2 AQUATIC HAZARD (LONG-TERM) - Category 2 GHS label elements Hazard pictograms Signal word Tel : +1-888-GHS-7769 (447-7769) / +1-450-GHS-7767 (447-7767) www.kmkregservices.com www.askdrluc.com www.ghssmart.com

Open the catalog to page 1

Tap Magic EP-Xtra Aerosol Section 2. Hazard(s) identification Hazard statements : H222 - Extremely flammable aerosol. H280 - Contains gas under pressure; may explode if heated. H317 - May cause an allergic skin reaction. H411 - Toxic to aquatic life with long lasting effects. Precautionary statements Prevention Storage Disposal Hazards not otherwise classified (US) : P280 - Wear protective gloves. P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 - Do not spray on an open flame or other ignition source. P273 - Avoid release to the environment....

Open the catalog to page 2

Tap Magic EP-Xtra Aerosol Section 4. First aid measures Description of necessary first aid measures Eye contact Skin contact : Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 20 minutes. Get medical attention if irritation occurs. : Remove victim to fresh air and keep at rest in a position comfortable for breathing. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to...

Open the catalog to page 3

Tap Magic EP-Xtra Aerosol Section 4. First aid measures See toxicological information (Section 11) Section 5. Fire-fighting measures Extinguishing media Suitable extinguishing media Unsuitable extinguishing media Specific hazards arising from the chemical Hazardous thermal decomposition products Special protective actions for fire-fighters Special protective equipment for fire-fighters : Use an extinguishing agent suitable for the surrounding fire. : None known. : Extremely flammable aerosol. Runoff to sewer may create fire or explosion hazard. In a fire or if heated, a pressure increase will...

Open the catalog to page 4

Tap Magic EP-Xtra Aerosol Section 6. Accidental release measures Small spill Large spill : Stop leak if without risk. Move containers from spill area. Use spark-proof tools and explosion-proof equipment. Dilute with water and mop up if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and place in an appropriate waste disposal container. Dispose of via a licensed waste disposal contractor. : Stop leak if without risk. Move containers from spill area. Use spark-proof tools and explosion-proof equipment. Approach release from upwind. Prevent entry into sewers,...

Open the catalog to page 5

Tap Magic EP-Xtra Aerosol Section 8. Exposure controls/personal protection fraction NIOSH REL (United States, 10/2016). TWA: 5 mg/m³ 10 hours. Form: Mist STEL: 10 mg/m³ 15 minutes. Form: Mist OSHA PEL (United States, 5/2018). TWA: 5 mg/m³ 8 hours. None. NIOSH REL (United States, 10/2016). TWA: 1000 ppm 10 hours. TWA: 1800 mg/m³ 10 hours. OSHA PEL (United States, 5/2018). TWA: 1000 ppm 8 hours. TWA: 1800 mg/m³ 8 hours. ACGIH TLV (United States, 3/2020). Oxygen Depletion [Asphyxiant]. Explosive potential. NIOSH REL (United States, 10/2016). TWA: 800 ppm 10 hours. TWA: 1900 mg/m³ 10 hours. ACGIH...

Open the catalog to page 6

Tap Magic EP-Xtra Aerosol Section 8. Exposure controls/personal protection Oxygen Depletion [Asphyxiant]. Explosive potential. CA Alberta Provincial (Canada, 6/2018). 8 hrs OEL: 1000 ppm 8 hours. CA Quebec Provincial (Canada, 7/2019). TWAEV: 800 ppm 8 hours. TWAEV: 1900 mg/m³ 8 hours. CA Saskatchewan Provincial (Canada, 7/2013). STEL: 1250 ppm 15 minutes. TWA: 1000 ppm 8 hours. CA British Columbia Provincial (Canada, 1/2020). Explosive potential. STEL: 1000 ppm 15 minutes. CA Ontario Provincial (Canada, 6/2019). Explosive potential. STEL: 1000 ppm 15 minutes. Appropriate engineering controls...

Open the catalog to page 7

Tap Magic EP-Xtra Aerosol Section 8. Exposure controls/personal protection Other skin protection Respiratory protection : Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product. : Based on the hazard and potential for exposure, select a respirator that meets the appropriate standard or certification. Respirators must be used according to a respiratory protection program to ensure proper fitting, training, and other important aspects of use....

Open the catalog to page 8

Tap Magic EP-Xtra Aerosol Section 10. Stability and reactivity Reactivity : No specific test data related to reactivity available for this product or its ingredients. Chemical stability Possibility of hazardous reactions : Under normal conditions of storage and use, hazardous reactions will not occur. : Avoid all possible sources of ignition (spark or flame). Incompatible materials : Reactive or incompatible with the following materials: oxidizing materials. Hazardous decomposition products : Under normal conditions of storage and use, hazardous decomposition products should not be produced....

Open the catalog to page 9

Tap Magic EP-Xtra Aerosol

Tap Magic EP-Xtra Aerosol

Catalog excerpts

All Tap Magic - Division of the Steco Corp. catalogs and technical brochures