*mydirectindustry

VTM42-20-20-20

Product catalog summary

Overview: TAON Hydraulic Components ApS specializes in hydraulic solutions, components, and tools, offering a range of products including power steering pumps and VTM vane pumps. The company provides comprehensive support to ensure optimal solutions for hydraulic needs.

Specifications:

VTM Vane Pump Models: Various models are available with different ring sizes and displacements, ranging from 0.21 in³/r (3.4 cm³/r) to 1.18 in³/r (19.3 cm³/r).
Maximum Speed and Pressure: The pumps operate at maximum speeds between 5000 to 7000 RPM and can handle pressures up to 2000 PSI (140 BAR).
Weight: The approximate weight of the pumps ranges from 14 to 16.4 lbs (6.4 to 7.4 kg).

Features:

Compact power source suitable for steering assemblies.
Includes integral relief and flow control for high efficiency and quiet operation.
Balanced cartridge design enhances performance.

Flow and Pressure Control:

Controlled flow rates are specified at 1600 RPM and 100 PSI, ranging from 1.5 USgpm (6 L/min) to 7.5 USgpm (28 L/min).
Pressure settings range from 500 PSI (35 BAR) to 2000 PSI (140 BAR).

Service Parts Information:

Cartridge Kit Rotation: Instructions for changing the cartridge kit rotation include ensuring the correct orientation of the cam ring and vanes.
Flow Control Relief Valve: Proper installation steps are crucial to avoid malfunctions and dangerous pressure levels.

Manifold - MF:

Features a 3/4 NPT connection and a 1/4 NPT bypass.
Bypass connection is necessary for installations operating at pump relief valve pressures for extended periods.

Catalog excerpts

Power steering pump VTM vane pump • Compact power source for steering assemblies Integral relief and flow control High efficiency Balanced cartridge design Quiet operation Values based on using anti-wear type petroleum oil 150 SUS at 100°F and 0 PSI inlet pressure MAXIMUM SPEED - RPM @1500 PSI RING SIZE (Delivery USgpm @ 1200 R/min & 100 PSI TAON Hydraulic Components ApS are specialists in hydraulic solutions, components and tool. TAON Hydraulic Components ApS • +45 24 48 84 80 • [email protected] • www.taon.dk © TAON Hydraulic will always help you find the

Open the catalog to page 1

Power steering pump TAON Hydraulic Components ApS are specialists in hydraulic solutions, components and tool. TAON Hydraulic Components ApS • +45 24 48 84 80 • [email protected] • www.taon.dk © TAON Hydraulic will always help you find the best solut

Open the catalog to page 2

Power steering pump - Service parts information Cartridge kit rotation To change cartridge kit rotation slide cam ring over rotor and vanes, making sure that radius edge of vanes is toward cam ring. Insert locating pins through cam ring, position cam ring so that the arrow on cam ring is pointing in the proper direction. Flow control relief valve When installing control relief valve install hex head first into the cover bore seating on the spring. Press plug fully in and insert lock pin. ** WARNING** ** Failure to follow these steps could cause serious malfunctions and pressures to rise to dangerous...

Open the catalog to page 3

Power steering pump Manifold - MF MANIFOLD ”MF” (275276N) - 3/4 NPT Connection - C/W 1/4 NPT Bypass This tank bypass conn. is required for installations which operate at pump relief valve pressures for periods exceeding 15 seconds. Connection must be made below oil level in reservoir. TAON Hydraulic Components ApS are specialists in hydraulic solutions, components and tool. TAON Hydraulic Components ApS • +45 24 48 84 80 • [email protected] • www.taon.dk © TAON Hydraulic will always help you find the best s

Open the catalog to page 4

VTM42-20-20-20

VTM42-20-20-20

Catalog excerpts

All Taon Hydraulik Komponenter ApS catalogs and technical brochures