*mydirectindustry

KK105-4-1284

Product catalog summary

Overview
TAON Hydraulic Components ApS specializes in hydraulic solutions, components, and tools. This document provides specifications for a 4-step telescopic cylinder designed for light-duty applications, particularly for lifting tipping bodies.

Specifications

Stroke: 1284 mm
Diameter of stages: 105 mm, 90 mm, 75 mm, 60 mm
Stroke per stage: 329 mm, 316 mm, 318 mm, 321 mm
Thrust per stage: 173 kN, 127 kN, 88 kN, 57 kN (Max admissible: 77 kN)
Oil capacity: Total 7.2 dm³
Mounting dimension: 556 mm + 20 mm pull out
Max pressure: 200 bar
Weight: 38 kg
Tipping weight: 8-15 tons
Chrome coating on stages

Technical Notes and Recommendations

The cylinder is primarily used for lifting and discharging materials from tipping bodies.
The maximum tipping weight is determined by the body weight plus payload, calculated at maximum pressure.
Design engineers must calculate the real tipping mass considering dump body geometry and operating conditions.
Do not exceed maximum thrust or pressure.
The cylinder is designed for longitudinal loads only and should not be used as a structural member or subjected to side loads.
Chrome coating type CRL with a minimum thickness of 5 µm is applied to telescopic stages.
Warranty excludes corrosion of coated or non-coated parts.
Maximum extension speed is less than 0.2 m/s.
Admissible hydraulic oil temperature ranges from -40°C to +100°C.

Catalog excerpts

4 steps Telescopic cylinder - Stroke 1284 mm. Overall drawing—light duty, ball-ball TAON Hydraulic Components ApS are specialists in hydraulic solutions, components and tools. • +45 24 48 84 80 • [email protected] • www.taon-hydraulic.com © TAON Hydraulic will always help you find the best sol

Open the catalog to page 1

4 steps Telescopic cylinder - Stroke 1284 mm. Mounting dimension 556 + 20mm pull out Cromed stages (Steli cromat) TAON Hydraulic Components ApS are specialists in hydraulic solutions, components and tools. • +45 24 48 84 80 • [email protected] • www.taon-hydraulic.com © TAON Hydraulic will always help you find the

Open the catalog to page 2

4 steps Telescopic cylinder - Stroke 1284 mm. Technical notes and specifications • The normal application of telescopic cylinder is to lift up tipping bodies, loaded with different materials, and consequently discharge this material whilst the cylinder is extended all along its stroke. The body weight plus the max payload are the max tipping weight that can be raised by the cylinder. This value, calculated at the max pressure, is a rough indication of the tipping power of the cylinder and must be used as a first criteria for the selection of the cylinder. The real tipping mass can only be calculated...

Open the catalog to page 3

KK105-4-1284

KK105-4-1284

Catalog excerpts

All Taon Hydraulik Komponenter ApS catalogs and technical brochures