Adjustable pressure switch - F37/M2 Technical Features Working temperature: -25°C - +85°C Switching frequency: 90 cycles/min Operating point: adjustable through an internale screw Switching accuracy: + 4% of end of scale at 20°C Fixed hysteresis value: - membrane execution ~ 10% of end scale at 20°C - piston execution ~ 15% of end of scale at 20°C Weight: 0,08 Kg Mechanical life: 106 cycles at 70 bar (1000 PSI) at 20°C Eletric features: - Maximum load: 0.5A at 250 Volt AC, 0.15A at 110 Volt DC - Exchange contacts (Common, NO and NC) - SPDT - Electric connection according to DIN43650 for M2 and M3 - Electric protection according to DIN 40050, IP65 - ATEX certification ATEX II 3G Ex nC IIB/IIIB T6 Gc/Dc IP65 Also available: - Special max pressure - Special electrical connections - Special value of hysteresis - UL-CSA for electric part only - Eletric protection according to DIN 40050, IP54 with P1 protection Cap (Atex execution not applicable) - Separator in stainless steel, carbon steel or plastic (<10 bar) for corrosive and/or high percentage of solid particles Switching Execution P Pressure Max range Hydraulic Body Type of Connection Material Seal Type of Electric Contact Setting Pressure Type of Electric Connection G If regueD M2 Gold sted, indi- Means falling Connector plated cate the pressure 16x16 L T contacts value setting, also BRASS PTFE (if setting please indicaIf E omitted pressure, te the value omitted EPDM means also indi1/4” BSP-M U means standard cate the H Means rising zinc HNBR contacts) condition pressure plated ”D” or ”U” setting, also If steel please indicaomitted te the value means NBR TAON Hydraulic Components ApS are specialists in hydraulic solutions, components and tool. TAON Hydraulic Components ApS • +45 24 48 84 80 • [email protected] • www.taon-hydraulic.com © TAON Hydraulic will always help you fin