VacuTEC - Vacuum Plasma Treater
2Pages

table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:31.00pt "Times New Roman", serif; } .font1 { font:7.00pt "Verdana", sans-serif; } .font2 { font:9.00pt "Verdana", sans-serif; } .font3 { font:11.00pt "Verdana", sans-serif; } .font4 { font:12.00pt "Verdana", sans-serif; } .font5 { font:14.00pt "Verdana", sans-serif; } .font6 { font:31.00pt "Verdana", sans-serif; } ProductInformation VacuTEC - Vacuum Plasma Treater lanlecK Vacuum Plasma Treaters integrate es built by OE TEC tion _ VacuTEC - Vacuum Plasma Treater Standard and Custumised Vacuum Plasma Treaters Tantec's VacuTEC Plasma Treater is designed for treatment of a large number of different injection moulded parts. The VacuTEC is available with both single and multiple tray configuration. The VacuTEC offers very fast treatment times and optimum adhesion properties for down-stream coating, gluing, painting and printing applications. TECHNICAL DATA Features: Easy to install and use Fast treatment times In the treating chamber a vacuum is built up to between 2 and 12 mbar before an electrical discharge is created through the integrated plasma electrode. Treatment cycle times are often short, between 2-120 seconds depending on the material and its formulation. The VacuTEC is appreciated for its simplicity of operation, reliability in production and fast process speed. Treating gasses such as argon and oxygen can be applied, but in most cases this is not necessary due to the high power exposed by the plasma discharge. VacuTEC uses the advanced Tantec power generator HV-X series as power supply and specially designed plasma transformers to provide voltage to the plasma electrodes. Standard or customised chambers Vacuum level Process gas Process control Cost efficient surface treatment Vacuum pressure Plasma Chamber doors Tantec A/S . Industrivej 6 . DK-6640 Lunderskov . T. +45 7558 5822 . sales@tantec.com Tantec GmbH . Monsheimer Str. 20 . D-71299 Wimsheim . T+49 7044 950012 . wimsheim@tantec.com Tantec EST Inc . 160 N. Brandon Drive . IL-60139 Glendale Heights . T +1 630 351 1320 . usa@tantec.com www.tantec.com

table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:7.00pt "Verdana", sans-serif; } .font1 { font:9.00pt "Verdana", sans-serif; } .font2 { font:12.00pt "Verdana", sans-serif; } .font3 { font:14.00pt "Verdana", sans-serif; } .font4 { font:15.00pt "Verdana", sans-serif; } .font5 { font:23.00pt "Verdana", sans-serif; } .font6 { font:31.00pt "Verdana", sans-serif; } TechnicalData Plasma & Corona Treaters guing ~u^fEfLjL^ Features: Easy to install and use ► Connect to mains power and compressed air. High power impact enables treatment times from 20-180 seconds,...