ProductInformation VacuLINE - Vacuum Plasma Treater Tantec VacuLINE Demo Solution. Conveyor transporting items for treatment into the chamber. VacuLINE – Vacuum Plasma Treater Standard and Customised Vacuum Plasma Treaters The Tantec VacuLINE Plasma Treater is designed for treatment of a variety of different injection moulded parts. The machine is ideal for in-line production, where no operators are needed. The VacuLINE system offers very fast treatment time and optimum adhesion properties for downstream coating, gluing, painting and printing applications. In the treating chamber a vacuum builds up to between 1 and 4 mbar before an electrical discharge is created through the integrated plasma electrode. Treatment cycle times are often short, between 20180 seconds depending on the material and its formulation. The VacuLINE plasma treater, is appreciated for its simplicity of operation, reliability in production and fast process speed. Treating gasses, such as argon and oxygen, can be applied but in most cases, this is not necessary due to the high power delivered by the plasma discharge. VacuLINE uses the advanced Tantec power generator HV-X series as power supply, and specially designed plasma transformers to provide voltage to the plasma electrodes. TECHNICAL DATA Features: Easy to install and use Fast treatment times Standard or customised chambers Process gas Process control Cost efficient surface treatment Vacuum pressure plasma Works in fully automated lines Tantec A/S . Industrivej 6 . DK-6640 Lunderskov . T. +45 7558 5822 . [email protected] Tantec GmbH . Mönsheimer Str. 20 . D-71299 Wimsheim . T+49 7044 950012 . [email protected] Tantec EST Inc . 160 N. Brandon Drive . IL-60139 Glendale Heights . T +1 630 351 1320 . [email protected] www.tantec.com

TechnicalData Plasma & Corona Treaters Features: Easy to install and use Connects to main power and compressed air. Fast treatment times High power impact enables treatment times from 20-180 seconds depending on materials. Standard or customised chambers Chamber size can be designed to most applications. Process gasses such as oxygen and argon can be used, but in most cases it is not necessary. Process control Entire plasma process is controlled by the HV-X generator and PLC unit. All parameters are displayed on the touch panel. (Standard – Proface). Cost efficient surface treatment Due to the...