SyrinTEC - Corona Treatment of Syringes
2Pages

table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:31.00pt "Times New Roman", serif; } .font1 { font:7.00pt "Verdana", sans-serif; } .font2 { font:9.00pt "Verdana", sans-serif; } .font3 { font:11.00pt "Verdana", sans-serif; } .font4 { font:12.00pt "Verdana", sans-serif; } .font5 { font:14.00pt "Verdana", sans-serif; } .font6 { font:31.00pt "Verdana", sans-serif; } . r lanlecffl ProductInformation SyrinTEC - Corona Treatment of Syringes SyrinTEC Corona Treatment of Syringes Features: SyrinTEC is specially designed for 360° treatment of PP and PE syringe barrels. Normally the SyrinTEC is built into the printing line and positioned as the final process before the barrels enter into the printing machine. Using the SyrinTEC enables treatment of the entire outside surface without any inside treatment, which would increase friction on the inside barrel and cause the plunger to drag when used. Non-contact treatment No inside treatment High line-speeds The purpose of surface treatment of polymer-based materials is to increase surface wettability through electrical discharge. The low surface energy of polymer-based substrates often leads to poor adhesion of inks, glues and coatings. To obtain optimum adhesion, it is necessary to increase the surface energy of the substrate to just above that of the material to be applied. Surface treatment with corona results in improved surface adhesion properties. SyrinTEC is specially designed for optimizing the adhesion properties of printing inks onto syringe barrels which are normally made of low surface energy polymer material such as PP, PE and others. SyrinTEC uses highly durable ceramic electrode elements resulting in complete and uniform treatment of the syringe barrels. The SyrinTEC is available both as a standard unit in a low and high speed configuration for intgration into existing printing lines customised units are available for spcifie printing machines. Fully integrated Different syringe sizes Complete process control Cost efficient treatment Uniform treatment Surface energy Tantec A/S . Industrivej 6 . DK-6640 Lunderskov . T. +45 7558 5822 . sales@tantec.com Tantec GmbH . Monsheimer Str. 20 . D-71299 Wimsheim . T+49 7044 950012 . wimsheim@tantec.com Tantec EST Inc . 160 N. Brandon Drive . IL-60139 Glendale Heights . T +1 630 351 1320 . usa@tantec.com www.tantec.com

table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:7.00pt "Verdana", sans-serif; } .font1 { font:9.00pt "Verdana", sans-serif; } .font2 { font:12.00pt "Verdana", sans-serif; } .font3 { font:14.00pt "Verdana", sans-serif; } .font4 { font:15.00pt "Verdana", sans-serif; } .font5 { font:23.00pt "Verdana", sans-serif; } .font6 { font:31.00pt "Verdana", sans-serif; } TechnicalData Plasma & Corona Treaters guing ~u^fEfLjL^ Features: on-contact treatment Electrodes do not touch the syringe barrel. Opposed polarity electrodes enable treatment with no metal jig inside the...