table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:31.00pt "Times New Roman", serif; } .font1 { font:7.00pt "Verdana", sans-serif; } .font2 { font:9.00pt "Verdana", sans-serif; } .font3 { font:11.00pt "Verdana", sans-serif; } .font4 { font:12.00pt "Verdana", sans-serif; } .font5 { font:14.00pt "Verdana", sans-serif; } .font6 { font:31.00pt "Verdana", sans-serif; } . r lanlecffl ProductInformation LabTEC - Corona Lab System LabTEC Corona Lab System LabTEC is a corona system that has been adapted for use in a laboratory setting. The generator provided with this system has been adapted to provide tighter control as the system is used as a test device. The system is strictly manual to ensure that this will be a safe addition to any laboratory. You can easily treat a variety of parts by holding the insulated handle of the electrode. TECHNICAL DATA Features: Easy to use Multi-layer counter electrode Usable for a number of different applications Adhesive bonding and finishing of moulded and extruded parts made of polyethylene, polypropylene, TPO and EPDM are constant manufacturing problems. Medical laboratory products made of polystyrene have poor wettability and poor cell attatchment. The low polar surface energy of these materials that causes these deficiencies can be increased with corona treatment. Corona surface treatment is modification of polymer surfaces with electrical discharge at atmospheric pressure. The corona process creates the necessary polar functional groups on the polymer surface, which promote adhesion and wettability. Tantec's bench top LabTEC is specially designed for treatment of small polymer parts. This includes both three-dimensional parts and films. The LabTEC is specially configured for R&D lab, model shop and small batch production.This system consists of a high-frequency power generator and a treating station with high-voltage transformer integrated into the station. The high-voltage transformer steps up the output signal from the generator to produce the high-frequency. The output of the transformer is connected to a stainless steel or ceramic roller electrode by way of an insulated high-voltage cable. Generator Touch panel DyneTEC test kit Comes as a package Tantec A/S . Industrivej 6 . DK-6640 Lunderskov . T. +45 7558 5822 . [email protected] Tantec GmbH . Monsheimer Str. 20 . D-71299 Wimsheim . T+49 7044 950012 . [email protected] Tantec EST Inc . 160 N. Brandon Drive . IL-60139 Glendale Heights . T +1 630 351 1320 . [email protected] www.tantec.com

table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:7.00pt "Verdana", sans-serif; } .font1 { font:9.00pt "Verdana", sans-serif; } .font2 { font:12.00pt "Verdana", sans-serif; } .font3 { font:14.00pt "Verdana", sans-serif; } .font4 { font:15.00pt "Verdana", sans-serif; } .font5 { font:23.00pt "Verdana", sans-serif; } .font6 { font:31.00pt "Verdana", sans-serif; } TechnicalData Plasma & Corona Treaters guing ~u^fEfLjL^ Features: Easy to use Multi-layer counter electrode This system is built for LAB use and is very flexible. It can be operated easily with safety shielding...