FoamTEC - Corona Treatment of Foam & Board
FoamTEC - Corona Treatment of Foam & Board
The document discusses the FoamTEC system by Tantec, designed for corona treatment of foam and board materials, particularly focusing on improving surface adhesion for materials like PP co-polymer, which have low surface energy.
Specifications
The FoamTEC system is available for single or dual-sided treatment and can handle materials up to 50 mm thick. It supports a treatment width of 10-3000 mm and a line speed of 1-30 m/min. The system operates on 3 Ph. 400 VAC or 230 VAC power and requires 5-6 bar of dry and clean compressed air. It is compatible with non-conductive materials such as PP, PE, PVC, nylon, PC, and PVR.
Procedures
The system ensures uniform treatment by increasing the thickness of the dielectricum layer, which allows corona discharge around the board's edge. This is crucial for optimizing treatment and minimizing waste. The system also features adjustable electrodes for maximum flexibility and digital read-out for electrode height adjustment.
Norms and Standards
The FoamTEC system complies with CE, RoHs, and WEEE regulations, ensuring it meets safety and environmental standards.
Recommendations
To avoid power loss and ozone creation, it is recommended to limit treatment inside the cavities of corrugated boards. The system includes an ozone filter to eliminate ozone generated during the process.
Technical Features
The system is easy to install and use, with features like watt density control, parallel opening, and process control. It is cost-efficient, safe, and clean, requiring only electrical power for effective treatment. The system includes safety switches and interlocks for secure operation.
Conclusion
The FoamTEC system by Tantec offers a comprehensive solution for enhancing surface adhesion on foam and board materials through effective corona treatment, ensuring uniformity and compliance with safety standards.
Catalog excerpts
table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:30.00pt "Sylfaen", serif; } .font1 { font:6.00pt "Verdana", sans-serif; } .font2 { font:7.00pt "Verdana", sans-serif; } .font3 { font:9.00pt "Verdana", sans-serif; } .font4 { font:11.00pt "Verdana", sans-serif; } .font5 { font:12.00pt "Verdana", sans-serif; } .font6 { font:14.00pt "Verdana", sans-serif; } .font7 { font:31.00pt "Verdana", sans-serif; } ProductInformation lanlecK Treatment of Foam & Board No corona/ozone inside cavieties Dielectric roller FoamTEC Corona Treatment of Foam and Board PP board is made of blended PP co-polymer and has one major disadvantage - low surface energy, resulting in poor surface adhesion for water-based adhesives and inks. Corona treatment Systems by Tantec significantly increase surface energy and improve adhesion. TECHNICAL DATA Features: Easy to install and use Single or dual sided To optimize treatment and minimize waste it is important that the entire board surface is treated. To achieve this result, it is necessary to have the corona discharge around the board's edge. Tantec solves this problem by increasing the thickness of the dielectricum layer, increasing the roller's longevity and allowing corona treatment to the board's edge. Increasing the insulation thickness will even out the discharge and ensure uniform treatment of boards up to 50 mm in thickness. The FoamTEC is available for single and dual sided treatment. Adjustable electrode which ensures max. flexibility. Electrode height adjustment with digital read-out. When treating corrugated board, it is important to limit the treatment inside the cavities to avoid loss of power and creation of ozone. The Foam TEC with thick insulation of counter electrodes limits treatment inside the cavities. Easy adjustment of treatment width Cost efficient treatment process Tantec A/S . Industrivej 6 . DK-6640 Lunderskov . T. +45 7558 5822 . [email protected] Tantec GmbH . Monsheimer Str. 20 . D-71299 Wimsheim . T+49 7044 950012 . [email protected] Tantec EST Inc . 160 N. Brandon Drive . IL-60139 Glendale Heights . T +1 630 351 1320 . [email protected] www.tantec.com
Open the catalog to page 1
table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:7.00pt "Verdana", sans-serif; } .font1 { font:9.00pt "Verdana", sans-serif; } .font2 { font:12.00pt "Verdana", sans-serif; } .font3 { font:14.00pt "Verdana", sans-serif; } .font4 { font:17.00pt "Verdana", sans-serif; } .font5 { font:23.00pt "Verdana", sans-serif; } .font6 { font:31.00pt "Verdana", sans-serif; } TechnicalData Plasma & Corona Treaters guing ~u^fEfLjL^ Features: Eas The system requires compressed air and the electrical connection. Both single and dual sided treatment systems available. The stainless steel...
Open the catalog to page 2All Tantec catalogs and technical brochures
PlasmaTEC-X2 Pages
VacuLINE2 Pages
LabTEC - Corona Lab System2 Pages
- Generator
- Leak monitor
- Real-time monitoring module
- Measurement monitoring module
- Surface treatment machine
- Electronic leak detector
- Monitoring system for the automotive industry
- Plasma surface treatment machine
- Automatic surface treatment machine
- Performance monitoring system
- Corona effect surface treatment machine
- Laboratory surface treatment machine
- Monitoring system for medical applications
- Medical device surface treatment machine
- 3D part surface treatment machine
- Plate surface treatment machine
- Vacuum surface treatment machine
- Surface treatment generator
- Discharge generator