table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:30.00pt "Sylfaen", serif; } .font1 { font:7.00pt "Verdana", sans-serif; } .font2 { font:9.00pt "Verdana", sans-serif; } .font3 { font:12.00pt "Verdana", sans-serif; } .font4 { font:14.00pt "Verdana", sans-serif; } .font5 { font:31.00pt "Verdana", sans-serif; } . r lanlecffl ProductInformation DyneTEC - Test Ink for Measuring Surface Energy DyneTEC Test Ink Test Ink for Measuring Surface Energy Determining the surface energy can be achieved by measuring contact angle or by using Tantec surface energy test inks - DyneTEC. TECHNICAL DATA Features: Easy to use ASTM and ISO norms Available from 30-72 mN/m^ Fast testing process This form of measurement is based on the ASTM/ISO method for measuring the surface energy of polypropylene film. When the test ink is applied to the surface, it will either form a continuous film on the surface or pull back into small droplets. If the liquid remains as a film for at least 3 seconds, the substrate will have a minimum surface energy of that ink value. Should the ink reticulate, the surface energy of the substrate is lower than that of the ink. The exact surface energy can be determined by applying a range of increasing or decreasing values of this ink. The inks are available in 2 mN/m increments from 30-58 mN/m -including 72 mN/m and is supplied in 20 ml glass bottles with integral brush applicator. Tantec offers two types of test inks. One which is made according to ISO8296 and classified as TOXIC. The other is a Tantec development which is based on ethanol and deionized water and is classified as a reference liquid. This liquid cannot be used for measuring PP surfaces. Non-toxic liquids Tantec A/S . Industrivej 6 . DK-6640 Lunderskov . T. +45 7558 5822 . [email protected] Tantec GmbH . Monsheimer Str. 20 . D-71299 Wimsheim . T+49 7044 950012 . [email protected] Tantec EST Inc . 160 N. Brandon Drive . IL-60139 Glendale Heights . T +1 630 351 1320 . [email protected] www.tantec.com

table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:7.00pt "Verdana", sans-serif; } .font1 { font:9.00pt "Verdana", sans-serif; } .font2 { font:12.00pt "Verdana", sans-serif; } .font3 { font:14.00pt "Verdana", sans-serif; } .font4 { font:17.00pt "Verdana", sans-serif; } .font5 { font:23.00pt "Verdana", sans-serif; } .font6 { font:31.00pt "Verdana", sans-serif; } TechnicalData Plasma & Corona Treaters guing ~u^fEfLjL^ Features: Easy to use Simply apply the ink using the integrated brush applicator. Using the ASTM/ISO norminated liquids ensures full traceability. All...