Technical Specifications:
The document provides detailed technical data for the PowerMaster Gearboxes, specifically the HL-Standard series. It includes dimensions for various gearbox sizes (HL 01, HL A1, HL B1) and their respective ratios (1:1, 2:1, 3:1). Key dimensions such as type size, and permissible torque at different shafts are listed.

Design Characteristics:
The gearboxes feature right-angle input and output, with permissible torque values and gear wheel arrangements (RA) specified. All assembly positions are possible, and customers are advised to specify their requirements when ordering.

Performance Parameters:
The document outlines permissible torque, continuous speed, and radial load for each gearbox size and ratio. For example, the HL 01 series has a nominal torque of 200 Nm for a 1:1 ratio, with a maximum short-term torque of 300 Nm.

Series HL-HW and HL-HWS:
These series include standard high-performance gearboxes with hollow shafts and keyways or shrink disks. The document specifies that the shrink disk is mounted on the extended hollow shaft, with its position indicated as either on the gear side or bearing side.

Order Example:
An example is provided for ordering, specifying the series, size, overall ratio, and gear wheel arrangement.

Additional Information:
The document includes contact information for TANDLER Zahnrad- und Getriebefabrik GmbH & Co. KG, and notes that technical data is subject to change.