AP-10
2Pages

{{requestButtons}}

Catalog excerpts

AP-10 - 1

Lead-free Solder Paste AP-10 Sn(Ag)Cu Product Description Solder Paste AP-10 has been designed as a no clean, air or nitrogen reflowable solder paste. This formula has a wider process window and shows better activity on OSP boards than previous no clean formulations. AP-10 is a solder paste that maintains its activity and printing characteristics for up to 8 hours without shear thinning. AP-10 can tolerate printing pauses of up to 60 minutes with an effective first print down to 0.5 mm. The residues from AP-10 are light amber and clear from solder balls. AP-10 flux residues are light amber and washable with alcohols and/or commercial cleaners. ■ Very good wetting behaviour on most surfaces ■ Good feeding & dosability ■ Very long stencil life ■ Very good tack time ■ Suitable for all soldering processes with indirect heating ■ Good washability of residues AP-10, uncleaned after 24 h: AP-10, uncleaned after 96 h: AP-10, uncleaned after 168 h: Control board after 24 h: Control board after 96 h: Control board after 168 h: Physical Properties Data for Sn(Ag)Cu solders, 85 - 88 % metal, Powder type 3, 4, 5 Viscosity 350 - 800 Pas Powder Type Melting Range Metal Content for Stencil or Sieve Printing Metal Content for Dispensing Application Solder paste AP-10 can be applied by dispensing, stencil or sieve printing TAMURA ELSOLD GmbH www.tamura-elsold.de HuttenstraKe 1 ■ D-38871 llsenburg Phone +49 (0)39452 4879-11 ■ Fax: -66 info@tamura-elsold.de

Open the catalog to page 1
AP-10 - 2

Cleaning AP-10 is a no clean paste. Residues do not need to be removed in most cases, if cleaning is required solvents like ethanol, isopropanol or mixtures of alcohols and halogenated hydrocarbons as well as commercially available cleaners can be used for effective cleaning. Cassettes: DEK PRO-FLOW™ Cassettes Syringes: 10ccand30cc Jars: Cartridges: Refrigerated storage at 6 — 16 °C is recommended for extended storage times. The material should be allowed to reach room temperature by itself before opening containers to avoid condensation of moisture on the cold material. Printing Squeegee:...

Open the catalog to page 2

All TAMURA ELSOLD GmbH catalogs and technical brochures

  1. TFL-204-111M

    6 Pages

  2. SAC305

    2 Pages

  3. SM-388

    3 Pages

  4. AP-40

    3 Pages

  5. Ap-20

    3 Pages