TCC-B D97 D2500 bath
4Pages

Tamson Instruments Specification sheet Adjustable Cloud and Pour Point Bath ASTM D97 - ASTM D2500 - ISO 3015 - ISO 3016 - IP 15 - IP 219 Used materials inside bath Pump pressure [mBar] Bath volume Drain to empty bath Wheels fitted for easy transport Compact, low noise Auto tune, high precision Position for six jackets (TLC40-14) Position for four jackets (TCC-B) Control mechanism With the compressor running continuously, the fluid temperature is regulated through an electronic controlled heater. Span The TLC40-14 operates from -40°C to +20C (40°F..68F). The TCC-B operates from -88°C to +20°C (-126°F to +68°F). Depth bath Cooling medium The used cooling system is ozone friendly and doesn’t contain any CFK/HCFK gas. Opening bath General Apparatus to determine the cloud and pour point manually. The TLC40-14 or TCC-B are single and adjustable circulator baths with position for six or four jackets. The pour point describes a procedure for testing the fluidity of a petroleum product at a temperature. The cloud point is defined as the temperature of a liquid specimen when the smallest observable cluster of wax crystals first appears upon cooling. Tamson is also supplying a liquid bath to preheat the sample to 48 ± 1.5°C or 12°C above the expected pour point, please see table 3. Heat removal * 24T0399: Optional pump (85~260V) pressure max 1 Bar, flow max 16 ltrs/min. Accuracy The set point is adjustable in steps of 0.1. The overall system accuracy is better than  0.1C. The temperature readout is standard available in C, on request in F. Pump A pressure pump provides circulation in the bath or via an external circuit. The pump pressure is 300 mBar and 10 liters per minute (no counter pressure) for TLC40-14. For the TCC-B the pump pressure is 1000 mBar and 16 liters per minute. With the TCC-B, the pump speed can be adjusted. Safety The bath conforms to CE regulations. It also is equipped with a mechanical adjustable and resettable safety thermostat to guarantee safe around the clock operation.

Tamson Instruments Specification sheet Adjustable Cloud and Pour Point bath Accessories Table 1: Necessary accessories TLC40 TCC-B -14 Insulated cover for six positions with insulated lids. Insulated cover for four positions with insulated lids. Table 2: Accessories TLC40 TCC-B Description -14 Test jar for cloud and pour point, case of 24 1 pieces. 6 Test jar for cloud and pour point, 1 piece. Felt gasket (pack of ten pieces). Felt disk (pack of ten pieces). Cork for test jar (P/N 31T0012 or 09T0142), pack of ten pieces. Cork for bath thermometer, pack of ten pieces. ASTM S5C thermometer...

Tamson Instruments Specification sheet Adjustable Cloud and Pour Point bath Bath to preheat samples Table 3: Bath to preheat samples to 48 ± 1.5°C or 12°C above the expected pour point P/N Description TC16 circulator, including cover with six ø 51mm openings with lids and a thermometer opening. 230V/5060Hz TC16 circulator, including cover with six ø 51mm openings with lids and a thermometer opening. 115V/60Hz Cork for bath thermometer, pack of ten pieces. Thermometer similar to ASTM 61C with special lowhazardous filling and works certificate at 100°C.

Tamson Instruments Specification sheet Adjustable Cloud and Pour Point bath Graphs Temperature stability (methanol used as bath liquid) Set point = 0°C 0°C Max Time [hrs:min] Cooling down TLC40-14 (methanol used as bath liquid) Cooling down TCC-B (methanol used as bath liquid) Time [hrs:min]