Datasheet Very High-Density Versatile Multiplexer KEY FEATURES • 2-pole, 24-channel, 2 banks • All channels are accessible by both buses, allowing self-testing • 2A hot or cold switching • Switch up to 220 VDC / 250 VAC and up to 60w max power • Simple 160-pin DIN Male Connector • LabView driver supplied • Poles are accessible from both the front and rear connectors • Compatible with the CHAS-8SLO4U-01 chassis • Highly adaptable for effortless customization to accommodate various configurations This module is specifically designed for use with Tame- Test’s CHAS-8SLO-4U-01 chassis. When combined with the chassis and utilizing all 8 modules, it enables high quality electro-mechanical signal relays enabling up to 12 instruments connected to the chassis’s back each channel to switch current up to 2A and voltage panel to access all channels within the multiplexers. This results in a total capacity of up to 384 channels. The module is supplied with a LabVIEW driver, ensuring gnal routing in an automatic test equipment, it is al- compatibility for integration into test sequence software. Ad- lowing access to 48 channels. ditionally, it can be controlled using native SCPI commands. Tame-Test - TRONICO Group - 26 rue du Bocage - 85660 Saint-Philbert-de-Bouaine (France) +33 (0)2 51 41 91 35 - [email protected] - www.tame-test.com All the information contained in this document is the exclusive property of TRONICO and cannot be reproduced nor communicated with a third party without the express written authorization of TRONICO. TRONICO reserves the right to make any changes without prior notice. Tame-Test is a registered trademark of TRONICO. STRICTLY C

Datasheet Very High-Density Versatile Multiplexer HARDWARE CONFIGURATION External BUS isolation Channel isolation Channel isolation TECHNICAL SPECIFICATIONS SWITCHING SPECIFICATIONS Switch time Max continuous carry current Initial on path resistance Minimum voltage Differential thermal offset Operate time Operate Time Release time • without diode in parallel • with diode in parallel Bounce time max Expected life (operations) • • • • • resistive, 125 VDC / 0.24A - 30 W resistive, 220 VDC / 0.27A - 60 W resistive, 250 VAC / 0.25A - 62.5 VA resistive, 30 VDC / 1A - 30 W resistive, 30 VDC / 2A -...

TAME-TEST TRONICO MECHANICAL SPECIFICATIONS SAFETY, CE & ROHS COMPLIANCE TT-MUX-24C-2P-2B-01 chassis is fully CE compliant and meet applicable EU directives, Low Voltage Safety directive EN61010-1:2010 and EMC directive EN61326-1:2013 TT-MUX-24C-2P-2B-01 chassis is also compliant the European Restriction of Hazardous Substances directive (RoHS). PRODUCT CUSTOMIZATION The TT-MUX-24C-2P-2B-01 multiplexer can be customized: number of poles and channels, bank configuration. For further information, please contact us. Tame-Test - TRONICO Group - 26 rue du Bocage - 85660 Saint-Philbert-de-Bouaine (France)...

TAME-TEST TRONICO FRONT CONNECTOR PINOUT Tame-Test - TRONICO Group - 26 rue du Bocage - 85660 Saint-Philbert-de-Bouaine (France) +33 (0)2 51 41 91 35 - [email protected] - www.tame-test.com All the information contained in this document is the exclusive property of TRONICO and cannot be reproduced nor communicated with a third party without the express written authorization of TRONICO. TRONICO reserves the right to make any changes without prior notice. Tame-Test is a registered trademark of TRONICO. STRICTLY CONFIDENTIAL TRONICO