Braiding machines Gauge 140 & 154 Braiding machines Gauge Depending on the yarn used or the product to be braided, Ratera may supply different useful and necessary accessories so that the final desired product can actually be obtained. Some instances are: • Different type of gatherers at the braiding point with or without detector. • Different take off systems depending on the rope diameter to be produced. • Different take up systems of the braided product either on a crosswinding spool with no flanges or on a parallel one with flanges and different sizes. A service adapted to all your requirements Ratera has an answer to all his customers’ requirements: Regarding the sample received of the product that the customer needs to braid, our technical department will suggest to you the suitable braider as well as a calculation of the production (rentabily). Even when the customer does not have a sample, will be informed of what it needs to be done. In this way, Ratera offers you the right machinery including all the necessary accessories in order to elaborate the required products. E 140 Number of spindles per head Number of spindles per head Talleres Ratera SA Av. dels Dolors, 13 Apt. Correos (PO Box) 228 08243 Manresa (Barcelona) Spain NOTE: According to machinery directive 83/392 about safety for the European market, machines must be protected. However, in order to allow for a betrter display some of this catalog’s illustrations havebeenmade without the mandatory protections. The company reserves the right to modify and improve the characteristiques of its products without notice.

Braiding machines Gauge 140 which gives the set consistency and robustness. • In its lower part a reversed cogged bobbin-holder disc prevents yarn dirt from getting inside thus avoiding a likely interference of the yarn's right exit. • On the carrier’s frame base a built-in steel cap/bush facilitates the bobbin-holder disc its sliding and in turn avoids its likely wear. Making reference to Carrier gauge 154 which offers the following technical advantages: The most important part on a Braider is, with no doubt, the carrier. Thus, Ratera has concentrated his efforts to develop a carrier on a fifth...

Braiding machines Gauge 140 which gives the set consistency and robustness. • In its lower part a reversed cogged bobbin-holder disc prevents yarn dirt from getting inside thus avoiding a likely interference of the yarn's right exit. • On the carrier’s frame base a built-in steel cap/bush facilitates the bobbin-holder disc its sliding and in turn avoids its likely wear. Making reference to Carrier gauge 154 which offers the following technical advantages: The most important part on a Braider is, with no doubt, the carrier. Thus, Ratera has concentrated his efforts to develop a carrier on a fifth...

Depending on the yarn used or the product to be braided, Ratera may supply different useful and necessary accessories so that the final desired product can actually be obtained. Some instances are: • Different type of gatherers at the braiding point with or without detector. • Different take off systems depending on the rope diameter to be produced. • Different take up systems of the braided product either on a crosswinding spool with no flanges or on a parallel one with flanges and different sizes. Ratera has an answer to all his customers' requirements: Regarding the sample received of the...