Product Overview:
The document describes the Stroke Counter Model 22GE manufactured by Talleres Emit, S.A., located in Barcelona, Spain. This device is designed to count mechanical strokes or impacts.

Specifications

• Type: Stroke Counter (Cuenta Golpes)
• Model: 22GE
• Enclosure: Hermetically sealed (totally watertight)
• Number of Digits: 5
• Digit Height: 4.5 mm
• Maximum Counting Rate: Approximately 1000 strokes per minute (spm)
• Lever Position: Variable on the shaft according to user requirements
• Maximum Oscillation Angle: 42 degrees
• Mounting: Secured from the rear using M4 diameter screws

Mechanical and Installation Details

The lever position can be adjusted to either right or left side, with two possible positions (Position I and Position II) to accommodate installation needs. The mounting base uses screws with a diameter of 4 mm (M4), ensuring secure attachment.

Contact and Manufacturer Information

Manufacturer: Talleres Emit, S.A.
Address: Polígon Industrial "Can Mascaró", Carrer Ponent, 68, 08756 La Palma de Cervelló, Barcelona, Spain
Contact: Phone +34.902.10.71.69, Fax +34.902.10.71.68, Email: [email protected]
Website: www.talleres-emit.com

Critical Parameters and Recommendations

• The device is designed for a maximum counting rate of 1000 strokes per minute, which should not be exceeded to ensure accuracy and durability.
• The hermetic sealing protects the internal mechanism from environmental factors, making it suitable for harsh or wet environments.
• Lever position adjustment allows flexibility in installation depending on the mechanical setup.
• Proper mounting using M4 screws is essential for stable operation.